TENDO Zero CAT40 Ø5/8"x4"
Hydro-Dehnspannfutter
Ident.-Nr. 0203654Z
Dieses Produkt ist abgekündigt und ist nicht mehr erhältlich.
Jetzt anfragen
Dieses Produkt kann online nur angefragt werden.
TENDO Zero CAT40 Ø5/8"x4", Werkzeughalter
- Hydro-Dehnspannfutter
- Baureihe: TENDO Zero
- Werkzeughalterschnittstelle: CAT 40
- Spanndurchmesser: 5/8"
- Auskraglänge: 101.6 mm
- Rundlaufgenauigkeit: < 0,003 mm bei 2,5 x DRundlaufgenauigkeit von 0 µm einstellbar
- Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
- Min. Drehmoment: 185 Nm
Technische Details
Technology | Hydraulic expansion toolholder |
---|---|
Series | TENDO Zero |
Toolholder interface | CAT 40 |
Toolholder standard | ASME B5.50 |
Clamping diameter D1 | 5/8" |
D2 [mm] | 38.0 |
D3 [mm] | 44.45 |
D6 [mm] | 33.5 |
Projecting length L1 [mm]/[inch] | 101,6 mm / 4.0" |
L2 [mm] | 49.0 |
L3 [mm] | 10.0 |
L4 [mm] | 50.0 |
L5 [mm] | 82.55 |
G | M10x1 |
Min. torque [Nm] | 185.0 |
Weight [kg] | 2.0 |
Version
Short, slim design
Run-out accuracy
< 0.003 mm at 2.5 x D
Run-out accuracy of 0 microns, adjustable
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ASME B5.50
Bores for form AF are sealed with set-screws as transport safety
Length-setting screw
With adjustment screw for axial length adjustment
Scope of delivery
Including hexalobular socket wrench for TENDO Zero, without actuation key
Individual
Additional sizes and customized designs are available upon request