JGP-P 50-2
ID 1460251
- ็ๅดในใใญใผใฏ: 2 mm
- ้ๅ: 380 N
- ้ๅ: 410 N
- ๆ้ซๅจๅฒๆธฉๅบฆ: 90 ยฐC
Technical details
| Stroke per jaw [mm] | 2.0 |
|---|---|
| Closing force [N] | 380.0 |
| Opening force [N] | 410.0 |
| Closing force (with finger lengths of 0 mm) [N] | 420.0 |
| Opening force (with finger lengths of 0 mm) [N] | 450.0 |
| Weight [kg] | 0.17 |
| Recommended workpiece weight [kg] | 1.9 |
| Cylinder volume per double stroke [cmยณ] | 6.0 |
| Min. operating pressure [bar] | 2.5 |
| Max. operating pressure [bar] | 8.0 |
| Nominal operating pressure [bar] | 6.0 |
| Min. air purge pressure [bar] | 0.5 |
| Max. air purge pressure [bar] | 1.0 |
| Closing time [s] | 0.015 |
| Opening time [s] | 0.015 |
| Max. permissible finger length [mm] | 70.0 |
| Max. permissible weight per finger [kg] | 0.18 |
| IP protection class | 40 |
| Min. ambient temperature [ยฐC] | 5.0 |
| Max. ambient temperature [ยฐC] | 90.0 |
| Repeat accuracy [mm] | 0.01 |
| Length X [mm] | 65.0 |
| Width Y [mm] | 30.0 |
| Height Z [mm] | 31.0 |
| Moment Mx max. [Nm] | 25.0 |
| Moment My max. [Nm] | 23.0 |
| Moment Mz max. [Nm] | 14.0 |
| Max. axial force Fz max. [N] | 600.0 |
Dimensions and maximum loads
์ต๋ ํ์ฉ ํ๊ฑฐ ์ถ์
Maximum permitted finger projection
Dimensions and maximum loads
The indicated moments and forces are statical values, apply for each base jaw and may appear simultaneously. Loads may additionally occur to the moment produced by the gripping force itself.
์ต๋ ํ์ฉ ํ๊ฑฐ ์ถ์
Maximum permitted finger projection
Lmax is equivalent to the maximum permitted finger length, see the technical data table.
- green
- Permitted range
- grey
- Inadmissible range
์๋ฆฌ์ฆ์ ๊ดํ ์ผ๋ฐ ์ฐธ๊ณ ์ฌํญ
ํ์ง๋ ฅ
P ๊ฑฐ๋ฆฌ์์ ๊ฐ ์ฃ ์ ์ ์ฉ๋๋ ๊ฐ๋ณ ํ์ ์ฐ์ ์ ์ธ ํฉ๊ณ์
๋๋ค(๊ทธ๋ฆผ ์ฐธ์กฐ).
ํ๊ฑฐ ๊ธธ์ด
์ฃผ ์ถ์ ๋ฐ๋ผ๋ณด๋ P ๊ฑฐ๋ฆฌ์ฒ๋ผ ์ฐธ์กฐ๋ฉด์์ ์ธก์ ๋ฉ๋๋ค. ์ต๋ ํ์ฉ ๊ฐ๋ฅํ ํ๊ฑฐ ๊ธธ์ด๋ ์ ๊ฒฉ ๋์ ์๋ ฅ์ด ๋ฌ์ฑ๋ ๋๊น์ง ์ ์ฉ๋ฉ๋๋ค. ์๋ ฅ์ด ๋ ๋์์ง๋ฉด ํ๊ฑฐ ๊ธธ์ด๊ฐ ์ ๊ฒฉ ๋์ ์๋ ฅ์ ๋น๋กํ์ฌ ๊ฐ์ํด์ผ ํฉ๋๋ค.
๋ฐ๋ณต ์ ๋ฐ๋
100ํ ์ฐ์ ์คํธ๋กํฌ ๋์์ ๋ง๋จ ์์น ๋ถํฌ๋ก ์ ์๋ฉ๋๋ค.
๊ณต์๋ฌผ ์ค๋
์ค๋ ฅ g๋ก ์ธํ ๊ฐ์๋์์ ๊ณต์๋ฌผ ํธ์ฐจ์ ๋์ํ๋ 0.1์ ์ ์ง ๋ง์ฐฐ ๊ณ์์ 2์ ์์ ๊ณ์๋ฅผ ๊ฐ์ถ ํฌ์ค ๋ง์ถค ๊ทธ๋ฆฌํ์ ์ํด ๊ณ์ฐ๋ฉ๋๋ค. ๋ผ์๋ง์ถค์ ๋๋ ํฌ์ฐฉ ๊ทธ๋ฆฌํ์ ๊ฒฝ์ฐ, ํ์ฉ ๊ณต์๋ฌผ ์ค๋์ด ํจ์ฌ ๋ ๋์ต๋๋ค.
ํ์ ๋ฐ ๊ฐ๋ฐฉ ํ์
์ ํ๋ฆฌ์ผ์ด์
๋ณ ๊ทธ๋ฆฌํผ ํ๊ฑฐ ์์ด ๋ฒ ์ด์ค ์ฃ ๋ง ์ด๋ํ๋ ์๊ฐ์
๋๋ค. ๋ฐธ๋ธ ๊ตํ ์๊ฐ, ํธ์ค ์ถฉ์ ์๊ฐ ๋๋ PLC ๋ฐ์ ์๊ฐ์ ํฌํจ๋์ง ์์ผ๋ฏ๋ก ์ฌ์ดํด ์๊ฐ์ด ๊ณ์ฐ๋ ๋ ๊ณ ๋ ค๋์ด์ผ ํฉ๋๋ค.
์๋ ์๋ฆฌ
ํ๋ฉด ํ์ ํธ๋์ค๋ฏธ์
์ด ์๋ ์จ์ง ๊ธฐ์ด
ํ์ฐ์ง ์ฌ๋ฃ
์๋ฃจ๋ฏธ๋
๋ฒ ์ด์ค ์ฃ ์ฌ๋ฃ
๊ฐ์ฒ
์๋
๊ณต์, ISO 8573-1:2010 [7:4:4]์ ๋ฐ๋ฅธ ์ฌ๊ณผ๋ ์์ถ ์์ด.
๋ณด์ฆ
24๊ฐ์
์๋น์ค ์๋ช
ํน์ง
์์ฒญ ์
์ ๊ณต ๋ฒ์
์ฃผ๋ฌธํ ๋ฒ์ ์ ๊ทธ๋ฆฌํผ, ์ก์ธ์๋ฆฌ ํคํธ(์ผํฐ๋ง ์ฌ๋ฆฌ๋ธ, ์ง์ ์ฐ๊ฒฐ์ฉ O-๋ง/์์ธํ ๋ด์ฉ์ ์ฌ์ฉ ์ค๋ช
์ ์ฐธ์กฐ) ๋ฐ ์์ ์ ๋ณด. ์ ํ๋ณ ์ง์นจ์ schunk.com/downloads-manuals์์ ๋ค์ด๋ก๋ํ ์ ์์ต๋๋ค.
ํ์ง๋ ฅ ์ ์ง
๊ธฐ๊ณ ํ์ง๋ ฅ ์ ์ง ๋๋ SDV-P ์๋ ฅ ์ ์ง ๋ฐธ๋ธ๊ฐ ์๋ ๋ฒ์ ์ ์ฌ์ฉํ์ฌ ๊ฐ๋ฅ