WEL HSK-A 40 Ø16x75
WELDON Flächenspannfutter
ID 263505
WEL HSK-A 40 Ø16x75, Werkzeughalter
- WELDON Flächenspannfutter
- Baureihe: WELDON
- Werkzeughalterschnittstelle: HSK-A 40
- Spanndurchmesser: 16 mm
- Auskraglänge: 75 mm
- Rundlaufgenauigkeit: ≤ 0,003 mm gemessen vom Kegel zu D1
- Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
Specifiche tecniche
| 기술 | WELDON 엔드 밀 홀더 |
|---|---|
| 시리즈 | WELDON |
| 툴홀더 인터페이스 | HSK-A 40 |
| 툴홀더 표준 | DIN ISO 12164-1 |
| 클램핑 지름 D1 | 16 mm |
| D2 [mm] | 48.0 |
| D6 [mm] | 35.5 |
| 투영 길이 L1 [mm]/[인치] | 75 mm / 3.0" |
| L2 [mm] | 51.0 |
| L4 [mm] | 55.0 |
| G1 | M14 |
| 중량 [kg] | 0.74 |
| 냉각수 방수 | 예 |
| 표준 길이 | 예 |
Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB
Run-out accuracy
≤ 0.003 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Thread G1
G1 = thread for clamping screw
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Scope of delivery
Including WELDON clamping screw
Individual
Additional sizes and customized designs are available upon request