단일 모듈 NSE mini 90
클램핑 모듈
특히 알루미늄이나 플라스틱 가공과 같이 가벼운 힘이 가해지는 응용 분야나 측정 장치용 미니어처 클램핑 모듈. 특허 받은 구동 개념을 적용한 드라이브 링과 3개의 플랫 클램핑 슬라이드를 통해 구동되는 빠른 교체 팔레트 모듈.
설명
Advantages – Your benefits
- SCHUNK modular system
Innumerable combinations of standard clamping devices to suit all different types of machines - Low height design
Expands your machine's workspace - All pneumatic modules can be operated at a system pressure of 6 bar
Additional pressure intensifiers are not required - Positioning via short taper
Very easy joining process at a repeat accuracy of < 0.005 mm - Patented dual stroke system for highest pull-down forces
Therefore extremely rigid clamping without vibrations - Form-fit, self-retained locking
Full pull-down force is maintained even in the event of a pressure drop - Corrosion-free stainless steel design
Long life time and maximum process reliability - Turbo integrated by default
Pull-down force increased up to 300% for optimal utilization of the machine's performance, hence high efficiency. - One consistent clamping pin size for all NSE mini-modules
No danger of confusion or incorrect operation - Integrated slide monitoring
Can be used in automated applications
Options and special information
- The extremely flat, pneumatic quick-change pallet system
VERO-S NSE mini is used for smaller applications and is the optimum complement to the largest modular system from SCHUNK. Only 20 mm in height, this module extends the VERO-S range from SCHUNK with an extremely flat quick-change pallet system. The NSE mini disposes of lower pull down forces than the NSE3, and is particularly suitable for light cutting tasks. - The NSE mini 90 makes it possible to implement highly flexible, smallest and variable gauges for bore holes. Therefore the module is an expert for workpiece direct clamping, pallet clamping and handling. At a height of only 20 mm, it enables maximum use of the machine room in smaller machine tools and can be quickly and easily retrofitted.