KSF3 315-PM
ID 1514342
Vlastnosti produktu:
- 2čelisťový silový svěrák
- Středicí upínání
- Standardní zdvih
- Pneumatické monitorování koncové polohy
- Pneumatické monitorování kontaktu
- Základní čelisti: Jemné zoubkování a pero s drážkou
- Rozměry: 315 x 315 x 136 mm
- Rozsah upínací síly: 69 - 95 kN
- Zdvih na čelist: 6.5 mm
- Max. výška čelisti: 200 mm
- Opakovatelná přesnost: 0.02 mm
- Otevírací tlak: 6 - 9 bar
- Spotřeba vzduchu na zdvih: 10750 cm³
- Zavírací/otevírací čas: 2 s
- Vlastní hmotnost: 86 kg
Technické údaje
| Stroke per jaw [mm] | 6.5 |
|---|---|
| Min. clamping force [kN] | 69.0 |
| Max. clamping force [kN] | 95.0 |
| Repeat accuracy of vise [mm] | 0.02 |
| Max. jaw height [mm] | 200.0 |
| Distance H [mm] | 40.0 |
| Air consumption per stroke at 6 bar [cm³] | 10750.0 |
| Closing/opening time [s] | 2.0 |
| Weight [kg] | 86.0 |
Scope of delivery
Clamping force block, mounting screws for system jaws and clamping force block, cover plugs, fitting screws, clamping sleeves, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Clamping force range
The clamping force depends on the stroke due to the spring tension. Max. clamping force is reached in the "open" condition, min. clamping force in the "closed" condition.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)