GSW-B 50-Z
ID 308421
- Max. okolní teplota: 90 °C
- Průměr stopky: 20 mm
Technické údaje
| Vlastní hmotnost [kg] | 0.2 |
|---|---|
| Max. počet otáček [1/min] | 20.0 |
| Jmenovitý provozní tlak stlačeného vzduchu [bar] | 6.0 |
| Minimální provozní tlak stlačeného vzduchu [bar] | 4.0 |
| Max. provozní tlak stlačeného vzduchu [bar] | 8.0 |
| Jmenovitý provozní tlak chladící kapaliny [bar] | 40.0 |
| Min. provozní tlak chladicí kapaliny [bar] | 20.0 |
| Max. provozní tlak chladicí kapaliny [bar] | 50.0 |
| Třída ochrany IP | 40 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 90.0 |
| Průměr D [mm] | 52.0 |
| Výška Z [mm] | 66.0 |
| Připraveno pro středicí chapadla | ano |
Příslušné chapadlo je nutné objednat zvlášť.
Hodnoty specifické pro chapadlo jsou uvedeny na následujících stranách.
Rozměry a maximální zatížení
Maximální přípustný přesah
Uchopovací síla, uchopení zvenku
Uchopovací síla, uchopení zvenku
Uchopovací síla, uchopení zvenku
Uchopovací síla, uchopení zevnitř
Uchopovací síla, uchopení zevnitř
Uchopovací síla, uchopení zevnitř
Rozměry a maximální zatížení
Hodnoty síly a krouticích momentů jsou uvedeny vždy v případě příslušné velikosti chapadla.
Maximální přípustný přesah
Uchopovací síla, uchopení zvenku
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
Uchopovací síla, uchopení zvenku
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
Uchopovací síla, uchopení zvenku
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
Uchopovací síla, uchopení zevnitř
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
Uchopovací síla, uchopení zevnitř
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
Uchopovací síla, uchopení zevnitř
- Osa X:
- Délka prstu
- Osa Y:
- Uchopovací síla
General notes about the series
Gripping force
refers to the combination of a GSW-B with a correspondingly named gripper, and represents the minimum sufficient gripping force.
Finger length
is measured from the reference surface as the distance P in direction to the main axis.
Repeat accuracy
is defined as a distribution of the end Position for 100 consecutive strokes.
Closing and opening times
the indicated times depend on the flow rate and pressure of the drive medium and the therefrom resulting electrical resistances.
Operating principle
Pressure distributor and wedge-hook kinematics
Housing material
Aluminum alloy, anodized
Base jaw material
Blackened steel
Spindle interface material
Aluminum alloy
Actuation
hydraulically with machine coolant (filtered, max. particle size of 30 µm) or pneumatically with filtered compressed air in accordance with ISO 8573-1:2010 [7:4:4].
Warranty
24 months
Service life characteristics
on request
Scope of delivery
Fastening screws, centering elements, assembly instructions (operating manual with declaration of incorporation is available online). The gripper is not included and must be ordered separately in the desired version.