AGM-Z 160
ID 1575992
- 보정 Z: 15 mm
- 포스 Fz 최대: 4500 N
- 포스 Fd 최대: 9000 N
- 최대 탄성력: 1350 N
- IP 보호등급: 50
Technical details
| 보정 Z [mm] | 15.0 |
|---|---|
| 수축되는 체결력 [N] | 4500.0 |
| 연장되는 체결력 [N] | 7000.0 |
| 최소 탄성력 [N] | 900.0 |
| 최대 탄성력 [N] | 1350.0 |
| 최소 작동 압력 [bar] | 2.5 |
| 최대 작동 압력 [bar] | 6.5 |
| 정격 가동 압력 [bar] | 6.0 |
| 반복 정밀도 [mm] | 0.02 |
| 로봇측 연결 | ISO 9409-1-160-6-M10 |
| 툴측 연결 | ISO 9409-1-160-6-M10 |
| 중량 [kg] | 17.7 |
| 최소 주위 온도 [°C] | 5.0 |
| 최대 주위 온도 [°C] | 60.0 |
| 유체 소비 [cm³] | 370.0 |
| 확장 시간 [s] | 0.4 |
| 수축 시간 [s] | 0.8 |
| 에어 연결 잠금 및 잠금 해제 | G1/8" |
| 최대 편심 하중 [mm] | 800.0 |
| IP 보호등급 | 50 |
| 최대 정지 모멘트 Mx/My [Nm] | 550.0 |
| 최대 정지 모멘트 Mz [Nm] | 750.0 |
| X축 및 Y축 방향의 최대 정적 힘 [N] | 4000.0 |
| Z축 방향의 최대 정적 힘 [N] | 4500.0 |
| 최대 동적 모멘트 Mx/My [Nm] | 275.0 |
| 최대 동적 모멘트 Mz [Nm] | 380.0 |
| 힘 Fx 최대 동적 [N] | 1800.0 |
| 힘 Fy 최대 동적 [N] | 1800.0 |
| 힘 Fz 최대 동적 [N] | 2600.0 |
| 최대 포스 Fd [N] | 9000.0 |
Max. loads
AGM-Z 하중 다이어그램 – 수직 구조
AGM-Z 하중 다이어그램 – 수평 구조
Deflection
AGM-Z deflection diagram – horizontal structure
Max. loads
This is the sum of all static loads that are permitted to act on the compensation unit.
AGM-Z 하중 다이어그램 – 수직 구조
- X-axis:
- 하중 중심 거리
- Y-axis:
- 적재 용량
AGM-Z 하중 다이어그램 – 수평 구조
- X-axis:
- Distance of the center of gravity
- Y-axis:
- Load capacity
Deflection
AGM-Z deflection diagram – horizontal structure
- X-axis:
- Distance of the center of gravity
- Y-axis:
- Deflection
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Fluid consumption
refers to the air consumption per one retraction and extension cycle
Guidance system
Ball guides
Monitoring
via magnetic switch or inductive proximity sensor
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
hard anodized aluminum alloy, functional parts made of hardened steel
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months