ELP 100-H080-H1G
ID 1487974
- Max. zdvih: 80 mm
- Max. hnací síla: 104 N
Technical details
| Koncepce pohonu | Lineární přímý pohon |
|---|---|
| Max. zdvih [mm] | 80.0 |
| Jmenovitá síla [N] | 104.0 |
| Max. jmenovité zatížení (vodorovné) [kg] | 6.0 |
| Max. jmenovité zatížení (svislé) [kg] | 4.0 |
| Opakovatelná přesnost [mm] | ± 0.01 |
| Vlastní hmotnost včetně pojezdu [kg] | 6.6 |
| Vlastní hmotnost pojezdu [kg] | 1.78 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 55.0 |
| Třída ochrany IP | 20 |
| Třída čistého prostoru ISO 14644-1:2015 | 5 |
| Hlukové emise [dB(A)] | 68 |
| Vzdálenost N (pro momentové zatížení) [mm] | 179.0 |
| Délka X [mm] | 338.0 |
| Šířka Y [mm] | 97.0 |
| Výška Z [mm] | 68.5 |
| Jmenovité napětí [V] | 24.0 |
| Jmenovitý proud [A] | 1.6 |
| Max. proud [A] | 5.9 |
| Řídicí elektronika | integrované |
| Komunikační rozhraní | digitální I/O (vstupy/výstupy) |
| Počet digitálních vstupů | 2.0 |
| Logika jmenovitého proudu [A] | 0.06 |
| Max. moment Mx [Nm] | 83.0 |
| Max. moment My [Nm] | 107.0 |
| Max. moment Mz [Nm] | 107.0 |
| Max. síla Fy [N] | 3880.0 |
| Max. síla Fz [N] | 3880.0 |
| Max. síla Fz [N] | 3880.0 |
| Verze maziva H1 | ano |
Dimensionen und max. Belastungen
Čas pojezdu horizontálně
Dimensionen und max. Belastungen
Die angegebenen Kräfte und Momente sind Maximalwerte bei Einzelbelastung. Treten gleichzeitig mehrere Kräfte und/oder Momente auf, sind die maximal zulässigen Einzelwerte geringer.
Čas pojezdu horizontálně
- X-axis:
- rychlostní stupeň
- Y-axis:
- čas zdvihu
General notes about the series
Stroke
is the maximum nominal stroke of the unit. It can be reduced on both sides by end stops.
Repeat accuracy
is defined as a distribution of the end positions for 100 consecutive cycles.
Travel times
are pure movement times of the slide. PLC reaction times are not included and have to be considered when the cycle times are determined.
Payload
is the weight of the total weight which is attached to the cantilever arm. Please consider that service life will shorten if the maximum payload is exceeded. SCHUNK cannot assume any warranty for this.
Layout or control calculation
Verifying the sizing of the selected unit is necessary, since otherwise overloading can result. Please contact us for assistance.
Ambient conditions
The modules are mainly designed for the use in clean ambient conditions. Please note that the life time of the modules can shorten if they are used in harsh ambient conditions, and that SCHUNK cannot assume liability in such cases. Please contact us for assistance.
Housing material
Aluminum alloy, coated
Guidance
Backlash-free, pre-loaded roller guides
Drive
Linear direct drive
Scope of delivery
Accessory kit with centering sleeves, safety information (product-specific instructions are available online)
Warranty
24 months
Service life characteristics
on request