RotoRi
Jaw turning fixture
Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Description
Innovaties - uw voordelen
- Meer flexibiliteit
Inwendige en uitwendige klemming met een ring - Uitgebreide toepassingsmogelijkheden
Geschikt voor klauwplaatmaten van 80 – 1600 mm, voor 2-, 3-, 4- en 6-voudige klauwplaten - Uitstekende nauwkeurigheden
Nauwkeurige afstelling tot op 0,1 mm van de draaidiameter - grotere economische efficiëntie
Lagere installatiekosten dankzij de RotoFix-klempennen, alsmede kostenbesparingen op de spanklauwen - Snelle en flexibele handling
Optimale toegankelijkheid tot het draaigereedschap