TENDO SVL
Hydraulic Extensions
The TENDO SVL tool extension is designed for precise machining of difficult-to-access areas where low interfering contours are required.
The TENDO SVL extensions ideally complement each other in connection with the TENDO hydraulic expansion toolholders or the TRIBOS-R and TRIBOS-S polygonal toolholders. Both systems have a damping effect on the entire system and reduce vibrations.
The TENDO SVL extensions ideally complement each other in connection with the TENDO hydraulic expansion toolholders or the TRIBOS-R and TRIBOS-S polygonal toolholders. Both systems have a damping effect on the entire system and reduce vibrations.
Description
Advantages – Your benefits
- Micron precise tool change in seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices - Excellent vibration damping
Micro-blowouts are prevented, best workpiece surfaces, machine spindle protection, increased tool service life resulting in cost reductions - Dirt grooves for reliable torque transmission
Dry clamping surfaces, by displacement of oil, grease or lubricant residues into the dirt groove - Broad compatibility
Suitable for virtually every precision toolholder - Versatile in use
Can be combined with various toolholder systems - Fine-balanced by default
Suitable for high speeds with a balancing grade of G2.5 at 25,000 RPM - All commercially available tool shank types can be clamped
Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB Form B: with lateral pulling faces, shank form B in accordance with DIN 1835 Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE - High degree of flexibility
Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves
Options and special information
- Flexible clamping areas due to the use of intermediate sleeves
Intermediate sleeves allow clamping of various shank diameters from 3 - 32 mm with just one toolholder. Your advantage: Reduction of the acquisition costs, higher clamping force at the given shank diameter.