RotoRi
Jaw turning fixture
Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Description
Ventajas y beneficios
- Aumenta la flexibilidad
Sujeción de diámetro interior y exterior con un anillo - Extenso ámbito de aplicación
Compatible con tamaños de chuck de entre 80 y 1000 mm, para chucks de 2, 3, 4 y 6 mordazas - Excelentes precisiones
Ajuste preciso de 0,1 mm del diámetro de torneado - Mayor rentabilidad
Menores costes de preparación gracias a los pernos de sujeción RotoFix, así como un ahorro de costes en las mordazas para chuck - Manipulación rápida y flexible
Accesibilidad óptima de la herramienta de torneado.