arrow calendarnullcartcheck checkmark close contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menupin play rss searchshaft success twitter userwarning wechat xing youku youtube
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

Hydraulic Expansion Toolholders

TENDO WZS

less than 3 μ run-out accuracy

Description

Hydraulic expansion toolholder with manual actuation and closed clamping system for high-precision and economical tool grinding.

Advantages – Your benefits

Repeat accuracy < 0.003 mm, measured on the tool shank
Process reliability as well as best surface quality and shape accuracy due to uniform cutting edge action
Permanent run-out accuracy of the cutting edges
Better chip flow, more even cutting action, significantly increased tool life, as well as increased cutting speed and feed rate
Optimized interfering contour
A 30 to 40% slimmer interfering contour compared to our standard hydraulic expansion toolholders, for significantly improved interference between grinding wheel and toolholder
High clamping forces
Safe tool clamping even with short clamping depths or high interference between grinding wheel and toolholder is guaranteed
Extremely large clamping depth
Special tools with large shank lengths can be clamped up to 95 mm deep
Excellent vibration damping
Micro-blowouts are prevented, best workpiece surfaces, machine spindle protection, increased tool service life resulting in cost reductions
Micron precise tool change in seconds without peripheral equipment
Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices
Exact length preadjustment
Length adjustment in the range of 0.01 mm accuracy, with adjustment travel of 10 mm
High degree of flexibility
Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves
Broad compatibility
Can be ideally combined with TENDO SVL and TRIBOS SVL extensions
Read more Read less

Digital services forTENDO WZS

Matching with the product TENDO WZS, we offer various digital services – the perfect complement for maximum efficiency, planning and process reliability.

23 Products found

TENDO WZS CAT50 50 Ø1 1/4

TENDO WZS CAT50 50 Ø1 1/4"x111

ID 28000635
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  CAT 50
  • Toolholder standard  ASME B5.50
  • Clamping diameter D1  1 1/4"
  • D2  54 mm
More product information Less product information
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  CAT 50
  • Toolholder standard  ASME B5.50
  • Clamping diameter D1  1/2"
  • D2  36 mm
More product information Less product information
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  CAT 50
  • Toolholder standard  ASME B5.50
  • Clamping diameter D1  1"
  • D2  48 mm
More product information Less product information
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  CAT 50
  • Toolholder standard  ASME B5.50
  • Clamping diameter D1  3/4"
  • D2  42 mm
More product information Less product information
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  CAT 50
  • Toolholder standard  ASME B5.50
  • Clamping diameter D1  5/8"
  • D2  36.8 mm
More product information Less product information
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  CAT 50
  • Toolholder standard  ASME B5.50
  • Clamping diameter D1  7/8"
  • D2  45.2 mm
More product information Less product information
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  CAT 50
  • Toolholder standard  ASME B5.50
  • Clamping diameter D1  3/8"
  • D2  30.5 mm
More product information Less product information
TENDO WZS FLANGE Ø1 1/4

TENDO WZS FLANGE Ø1 1/4"x111

ID 28003748
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  FLANSCH / FLANGE
  • Clamping diameter D1  1 1/4"
  • D2  54 mm
  • D3  70 mm
More product information Less product information
TENDO WZS FLANGE Ø1/2

TENDO WZS FLANGE Ø1/2"x111

ID 28003746
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  FLANSCH / FLANGE
  • Clamping diameter D1  1/2"
  • D2  36 mm
  • D3  70 mm
More product information Less product information
TENDO WZS FLANGE Ø3/4

TENDO WZS FLANGE Ø3/4"x111

ID 28003747
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  FLANSCH / FLANGE
  • Clamping diameter D1  3/4"
  • D2  42 mm
  • D3  70 mm
More product information Less product information
TENDO WZS FLANGE Ø12x111

TENDO WZS FLANGE Ø12x111

ID 28003756
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  FLANSCH / FLANGE
  • Clamping diameter D1  12 mm
  • D2  36.5 mm
  • D3  70 mm
More product information Less product information
TENDO WZS FLANGE Ø20x111

TENDO WZS FLANGE Ø20x111

ID 28003757
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  FLANSCH / FLANGE
  • Clamping diameter D1  20 mm
  • D2  42 mm
  • D3  70 mm
More product information Less product information
TENDO WZS FLANGE Ø32x111

TENDO WZS FLANGE Ø32x111

ID 28003758
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  FLANSCH / FLANGE
  • Clamping diameter D1  32 mm
  • D2  54 mm
  • D3  70 mm
More product information Less product information
TENDO WZS SK50 Ø6x110

TENDO WZS SK50 Ø6x110

ID 219221
Ready for shipment in 3-6 days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  SK 50
  • Toolholder standard  DIN ISO 7388-1 AD
  • Clamping diameter D1  6 mm
  • D2  32 mm
More product information Less product information
TENDO WZS SK50 Ø8x110

TENDO WZS SK50 Ø8x110

ID 219222
Ready for shipment in 3-6 days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  SK 50
  • Toolholder standard  DIN ISO 7388-1 AD
  • Clamping diameter D1  8 mm
  • D2  33.5 mm
More product information Less product information
TENDO WZS SK50 Ø10x110

TENDO WZS SK50 Ø10x110

ID 219223
Ready for shipment in 3-6 days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  SK 50
  • Toolholder standard  DIN ISO 7388-1 AD
  • Clamping diameter D1  10 mm
  • D2  35 mm
More product information Less product information
TENDO WZS SK50 Ø12x110

TENDO WZS SK50 Ø12x110

ID 219224
Ready for shipment from stock
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  SK 50
  • Toolholder standard  DIN ISO 7388-1 AD
  • Clamping diameter D1  12 mm
  • D2  36.5 mm
More product information Less product information
TENDO WZS SK50 Ø14x110

TENDO WZS SK50 Ø14x110

ID 219229
Ready for shipment from 11 working days
  • Technology  Hydraulic Expansion Toolholders
  • Series  TENDO WZS
  • Toolholder interface  SK 50
  • Toolholder standard  DIN ISO 7388-1 AD
  • Clamping diameter D1  14 mm
  • D2  38 mm
More product information Less product information