IN 80-S-M8-SA
Inductive proximity switches
ID 301483
Inductive proximity switch IN, Version with lateral cable outlet
- Number of switching points: 1
- Switching distance: 1.5 mm
- Cylindrical sensor
- Thread sensor: M8x1
- Switching type: PNP
- Closer
- Cable length: 30 cm
- Electrical connection: M8
- Nominal voltage: 24 V
Technical details
| Measuring principle | inductive |
|---|---|
| Switching function | Closer |
| Type of switching | PNP |
| Number of switching points | 1 |
| Switching distance [mm] | 1.5 |
| Switching hysterisis from the nominal switching distance | < 15% |
| Max. switching frequency [Hz] | 3000.0 |
| Min. ambient temperature [°C] | -25.0 |
| Max. ambient temperature [°C] | 70.0 |
| LED display in sensor | no |
| Type of voltage | DC |
| Nominal voltage | 24.0 |
| Min. operating voltage | 10.0 |
| Max. operating voltage | 30.0 |
| Voltage drop [V] | 1.8 |
| Max. switching current | 0.15 |
| Short circuit protection | yes |
| Protected against polarity reversal | yes |
| Housing material | stainless steel |
| Cable connector/cable end | M8 |
| Cable length L [cm] | 30.0 |
| Cable diameter D [mm] | 3.0 |
| Cable design (wire cross section/number of wires) | 3x 0.14mm2 |
| Cable sheath material | PUR |
| Min. bending radius (dynamic) [mm] | 30.0 |
| Min. bending radius (static) [mm] | 15.0 |
| Weight [kg] | 0.023 |
| Protection class IP (sensor, plugged) | 67 |
| Protection class | III |
| Version with lateral cable outlet | yes |
*Tested cutting emulsions: r.rhenus TU 43P, Motorex Swisscool Magnum UX 550 and Oemeta 760 (1008339).
产品系列的常规说明
由于各产品相互关联调整，所以应采用合适的SCHUNK传感器监控SCHUNK抓取模块、旋转模块、线性模块以及机器人附件。
如果开关距离、开关功能、磁滞和电压等关键特性非常类似，通常也可使用其他制造商的接近开关来代替SCHUNK的感应接近开关（IN、INK）。
将其他制造商的传感器装配到SCHUNK产品中，可能会影响部分功能。我们亦不能保证其他制造商传感器功能正常或安全性。