MTTA HSK-A 63 MK4x160
Morse taper mountings with tangs
ID 23000521
MTTA HSK-A 63 MK4x160, Toolholders
- Morse taper mountings with tangs
- Series: Morse taper mountings with tangs
- Toolholder interface: HSK-A 63
- Morse taper: MK 4
- Projecting length: 160 mm
- Run-out accuracy: ≤ 0.008 mm measured from taper to internal taper
- Balancing grade: G6.3 at 8,000 RPM or Umax < 1 gmm
Technical details
| Tecnologia | Supporti cono morse |
|---|---|
| Serie | Supporti cono morse |
| Attacco portautensile | HSK-A 63 |
| Portautensile standard | DIN ISO 12164-1 |
| Dimensione MK | MK 4 |
| D2 [mm] | 48.0 |
| Lunghezza di proiezione L1 [mm]/[pollici] | 160 mm / 6.3" |
| L4 [mm] | 134.0 |
| Peso [kg] | 1.92 |
| A tenuta stagna | Sì |
| Lunghezze standard | Sì |
Versione
Per il montaggio di codoli cono morse, conformemente alla norma ISO 228B.
Concentricità
≤ 0,008 mm misurato dal cono al cono interno
Grado di bilanciatura
G6,3 a 8.000 giri/min o Umax < 1 gmm
Sedi chip
Fori sede chip conformi alla norma ISO 69873
Cambio del portautensile
Per il cambio automatico del portautensile
Ogni esigenza
Ulteriori misure e versioni personalizzate disponibili su richiesta