arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.

Whistle Notch mountings

Mechanical Toolholding Systems

The Whistle Notch mountings can be used to reliably clamp tools with a lateral clamping surface on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835E and DIN 6535E. The clamping screw and length adjustment screw are included in the scope of delivery.
Whistle Notch mountings

Whistle Notch mountings

The Whistle Notch mountings can be used to reliably clamp tools with a lateral clamping surface on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835E and DIN 6535E. The clamping screw and length adjustment screw are included in the scope of delivery.
Show series
23000334
HSK-A 63 
8 mm 
80 mm / 3.1" 
23001975
HSK-A 63 
10 mm 
80 mm / 3.1" 
23001976
HSK-A 63 
12 mm 
90 mm / 3.5" 
23001977
HSK-A 63 
14 mm 
90 mm / 3.5" 
23001978
HSK-A 63 
16 mm 
100 mm / 3.9" 
23001979
HSK-A 63 
18 mm 
100 mm / 3.9" 
23001980
HSK-A 63 
20 mm 
100 mm / 3.9" 
23001981
HSK-A 63 
25 mm 
110 mm / 4.3" 
23001982
HSK-A 63 
32 mm 
110 mm / 4.3" 
23001868
HSK-A 100 
6 mm 
90 mm / 3.5"