GSW-B 64-PZ
ID 308422
- Max. ambient temperature: 90 °C
- Shank diameter: 20 mm
Technical details
| Weight [kg] | 0.23 |
|---|---|
| Max. permissible RPM [1/min] | 20.0 |
| Nominal operating pressure compressed air [bar] | 6.0 |
| Minimum operating pressure compressed air [bar] | 4.0 |
| Max. operating pressure of the compressed air [bar] | 8.0 |
| Nominal operating pressure coolant [bar] | 40.0 |
| Min. operating pressure coolant [bar] | 20.0 |
| Max. operating pressure of the coolant [bar] | 50.0 |
| IP protection class | 40 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 90.0 |
| Diameter D [mm] | 64.0 |
| Height Z [mm] | 63.0 |
| Prepared for parallel grippers | yes |
| Prepared for centric grippers | yes |
The appropriate gripper has to be ordered separately.
Refer to the following pages for gripper-specific values.
Dimensions and maximum loads
Maximal zulässige Auskragung
Gripping force O.D. gripping
Gripping force O.D. gripping
Gripping force O.D. gripping
Gripping force I.D. gripping
Gripping force I.D. gripping
Gripping force I.D. gripping
Dimensions and maximum loads
Refer to the respective size of the gripper for the forces and torques.
Maximal zulässige Auskragung
Gripping force O.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force O.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force O.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force I.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force I.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force I.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Allgemeine Hinweise zur Baureihe
Greifkraft
bezieht sich auf die Kombination des GSW-B mit dem entsprechend genannten Greifer und ist die minimale Greifkraft, die erreicht wird.
Fingerlänge
wird ab derselben Bezugsfläche wie der Abstand P in Richtung der Hauptachse gemessen.
Wiederholgenauigkeit
ist definiert als Streuung der Endlage bei 100 aufeinanderfolgenden Hüben.
Schließ- und Öffnungszeiten
sind stark abhängig vom Durchfluss und Druck des Antriebmediums und den daraus resultierenden Strömungswiderständen.
Wirkprinzip
Druckteiler und Keilhakenkinematik
Gehäusematerial
Aluminiumlegierung, eloxiert
Grundbackenmaterial
Stahl, brüniert
Spindelschnittstellenmaterial
Aluminiumlegierung
Betätigung
hydraulisch über Maschinenkühlflüssigkeit (gefiltert, max. Partikelgröße 30 µm) oder pneumatisch, über gefilterte Druckluft nach ISO 8573-1:2010 [7:4:4].
Gewährleistung
24 Monate
Lebensdauerkennwerte
auf Anfrage
Lieferumfang
Befestigungsschrauben, Zentrierelemente, Montageanleitung (Betriebsanleitung mit Einbauerklärung online verfügbar). Der Greifer ist nicht enthalten und muss separat in der gewünschten Variante bestellt werden.