No product detail page could be found for this serial number. If you should have any questions about the product, you can search for the material number in the search field or contact us.
How can we help you?
Your request to SCHUNK
Find field sales representatives
Newsletter registration
Request CAD data
Your quote request
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
WELDON end mill holders can be used to reliably clamp tools with a lateral clamping face on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835B and DIN 6535HB. Clamping screw included in the scope of delivery or clamping screw with ballhead and length adjustment screw for the slim WELDON end mill holder.
WELDON end mill holders can be used to reliably clamp tools with a lateral clamping face on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835B and DIN 6535HB. The clamping screw is included in the scope of delivery. The WELDON Cool Flow enables peripheral cooling by means of cooling channels in the wall, which can be optionally closed with two M3 screws. The coolant is fed directly to the cutting edge of the tool. The WELDON Dual Contact variant with simultaneous taper and flat work surface closes the interface-related gap between tool flange and the front of the machine spindle with the interface of the flat work surface.
The WELDON Slim end mill holder can be used to reliably clamp tools with a lateral clamping surface on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835B and DIN 6535HB. Clamping screw with ball-shaped head and length adjustment screw are included in the scope of delivery. The WELDON Slim Cool Flow variant enables peripheral cooling by means of cooling channels in the wall, which can be optionally closed with two M3 screws. The coolant is fed directly to the cutting edge of the tool.
