AGM-WZ 080
ID 1591355
- Ausgleichsrichtung: WZ
- Ausgleichsweg Z: 10 mm
- Ausgleichswinkel: ± 5 °
Technical details
| Ausgleichsweg Z [mm] | 10.0 |
|---|---|
| Ausgleichswinkel [°] | ± 5 |
| Verriegelungskraft eingefahren [N] | 1300.0 |
| Verriegelungskraft ausgefahren [N] | 1700.0 |
| Min. Federkraft [N] | 200.0 |
| Max. Federkraft [N] | 300.0 |
| Losbrechmoment drucklos [Nm] | 6.0 |
| Verriegelungsmoment (A+B) Mx, My [Nm] | 50.0 |
| Haltemoment Mx, My zentrisch verriegelt (A+B) [Nm] | 100.0 |
| Verriegelungsmoment Mx, My Steuerkolben (B) [Nm] | 22.0 |
| Haltemoment Mx, My zentrisch verriegelt Steuerkolben (B) 0-6 bar [Nm] | 30.0 |
| Min. Betriebsdruck [bar] | 2.5 |
| Max. Betriebsdruck [bar] | 6.5 |
| Nennbetriebsdruck [bar] | 6.0 |
| Min. Betriebsdruck Steifigkeitseinstellung [bar] | 0.0 |
| Max. Betriebsdruck Steifigkeitseinstellung [bar] | 6.5 |
| Wiederholgenauigkeit [mm] | 0.02 |
| Wiederholgenauigkeit Winkel [°] | 0.08 |
| Anschluss roboterseitig | ISO 9409-1-80-6-M8 |
| Anschluss werkzeugseitig | ISO 9409-1-80-6-M8 |
| Eigenmasse [kg] | 7.2 |
| Min. Umgebungstemperatur [°C] | 5.0 |
| Max. Umgebungstemperatur [°C] | 60.0 |
| Fluidverbrauch [cm³] | 80.0 |
| Fluidverbrauch Zentrierung (A+B) [cm³] | 27.0 |
| Fluidverbrauch Steuerkolben (B) [cm³] | 14.0 |
| Ausfahrzeit [s] | 0.3 |
| Einfahrzeit [s] | 0.4 |
| Verriegelzeit [s] | 0.05 |
| Luftanschlüsse ver- und entriegelt | M5 |
| Max. außermittige Belastung [mm] | 260.0 |
| Schutzart IP | 40 |
| Max. statisches Moment Mx/My [Nm] | 100.0 |
| Max. statisches Moment Mz [Nm] | 100.0 |
| Kraft Fx/Fy max. statisch [N] | 1000.0 |
| Kraft Fz max. statisch [N] | 1100.0 |
| Max. dynamisches Moment Mx/My [Nm] | 50.0 |
| Max. dynamisches Moment Mz [Nm] | 75.0 |
| Kraft Fx max. dynamisch [N] | 400.0 |
| Kraft Fy max. dynamisch [N] | 400.0 |
| Kraft Fz max. dynamisch [N] | 550.0 |
| Max. Kraft Fd [N] | 2200.0 |
Max. Belastungen
AGM-WZ Lastdiagramm - Vertikaler Aufbau
AGM-WZ Lastdiagramm - Horizontaler Aufbau
Max. Belastungen
Es handelt sich hierbei um die Summe aller statischen Belastungen, die auf die Ausgleichseinheit wirken dürfen.
AGM-WZ Lastdiagramm - Vertikaler Aufbau
- X-axis:
- Abstand Schwerpunkt
- Y-axis:
- Traglast
AGM-WZ Lastdiagramm - Horizontaler Aufbau
- X-axis:
- Abstand Schwerpunkt
- Y-axis:
- Traglast
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Torque load
refers to the maximum holding torque of the compensation unit.
Breakaway torque
defines the torque required to set the compensation unit in motion.
Fluid consumption
refers to the air consumption per one locking and unlocking cycle
Monitoring
via magnetic switch or inductive proximity sensor
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Operating principle
via angular kinematics and pistons
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months