GSW-B 64-PZ
Shaft interface for grippers
ID 308422
Shaft interface for grippers GSW-B, Size: 64, pneumatic, hydraulic, Prepared for parallel grippers, Prepared for centric grippers
- Max. ambient temperature: 90 °C
- Shank diameter: 20 mm
Technical details
| Weight [kg] | 0.23 |
|---|---|
| Max. permissible RPM [1/min] | 20.0 |
| Nominal operating pressure compressed air [bar] | 6.0 |
| Minimum operating pressure compressed air [bar] | 4.0 |
| Max. operating pressure of the compressed air [bar] | 8.0 |
| Nominal operating pressure coolant [bar] | 40.0 |
| Min. operating pressure coolant [bar] | 20.0 |
| Max. operating pressure of the coolant [bar] | 50.0 |
| IP protection class | 40 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 90.0 |
| Diameter D [mm] | 64.0 |
| Height Z [mm] | 63.0 |
| Prepared for parallel grippers | yes |
| Prepared for centric grippers | yes |
The values only relate to the adapter GSW-B.
The appropriate gripper has to be ordered separately.
Refer to the following pages for gripper-specific values.
The appropriate gripper has to be ordered separately.
Refer to the following pages for gripper-specific values.
Dimensions and maximum loads
Maximum permitted finger projection
Gripping force O.D. gripping
Gripping force O.D. gripping
Gripping force O.D. gripping
Gripping force I.D. gripping
Gripping force I.D. gripping
Gripping force I.D. gripping
Dimensions and maximum loads
Refer to the respective size of the gripper for the forces and torques.
Maximum permitted finger projection
Gripping force O.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force O.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force O.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force I.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force I.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
Gripping force I.D. gripping
- X-axis:
- Finger length
- Y-axis:
- Gripping force
产品系列的常规说明
抓取力
GSW-B 与相应名称机械手的组合，表示满足使用的最小抓取力。
手指长度
沿主轴方向，从距基准面距离 P 处测得。
重复精度
定义为 100 个连续行程后极限位置分布。
闭合/打开时间
所示时间取决于传动介质的流速以及由此产生的电阻。
工作原理
压力分配器和楔块动力装置
外壳材料
铝合金，阳极氧化
基爪材料
黑钢
主轴接口材料
铝合金
启动
根据ISO 8573-1：2010 [7：4：4]，以液压方式采用机械冷却液（过滤后的最大粒径为30 µm）或以气动方式采用压缩空气进行过滤。
保修期
24 个月
使用寿命特性
根据要求
标配范围
紧固螺钉、定心元件、装配说明书（含制造商声明的操作手册可从官网下载）不包括抓手，必须在所需版本中单独订购。