arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
国の選択を変更して、お住まいの地域に関連する製品、サービス、および担当者に関する情報を表示します。
WEL JIS-BT 40 Ø10x100 유사 그림

WEL JIS-BT 40 Ø10x100

WELDON 엔드 밀 홀더

ID 23003487

WEL JIS-BT 40 Ø10x100, 툴홀더
  • WELDON 엔드 밀 홀더
  • 시리즈: WELDON
  • 툴홀더 인터페이스: JIS-BT 40
  • 클램핑 지름: 10 mm
  • 투영 길이: 100 mm
  • 흔들림 정확도: 테이퍼에서 D1까지 측정 시 0.003mm 이하
  • 밸런싱 등급: G2.5 @ 25,000 RPM 또는 Umax < 1 gmm
제공 범위: WELDON 클램핑 나사 포함
Technology WELDON end mill holders
Series WELDON
Toolholder interface JIS-BT 40
Toolholder standard DIN ISO 7388-2 JD/JF
Clamping diameter D1 10 mm
D2 [mm] 35.0
D6 [mm] 24.5
Projecting length L1 [mm]/[inch] 100 mm / 3.9"
L2 [mm] 41.0
L4 [mm] 73.0
G1 M10
Weight [kg] 1.44
Coolant-proof yes

Version
For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB

Run-out accuracy
≤ 0.003 mm measured from taper to D1

Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm

Thread G1
G1 = thread for clamping screw

Data carriers
Bore for data carrier as an option

Toolholder changes
For automatic toolholder changes

Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport

Scope of delivery
Including WELDON clamping screw

Individual
Additional sizes and customized designs are available upon request