Individually configurable stroke

The stroke per jaw can be configured to customer specifications between 100 mm and 400 mm per jaw with millimeter precision. (For size 10, the stroke is limited to 300 mm)

1) Variant with 100 mm stroke per jaw
2) Variant with 400 mm stroke per jaw

Finger version

The gripper is available in two finger versions. In addition to the basic variant for short finger lengths, a variant with a long finger length can also be configured for corresponding applications.

1) Short finger length with two guiding carriages per base jaw
2) Long finger length with four guiding carriages per base jaw

The gripper offers different options for mounting on robots or gantries.

1) Without adapter plate (please observe the installation instructions)
2) One-piece adapter plate (gripper side)
3) Adapter plate, complete (gripper side + blank)
4) Adapter plate, complete for screw connection according to EN ISO 9409

The position clamping enables the base jaw position to be clamped in the de-energized condition.

1) One clamping element each, incl. monitoring via a magnetic switch, clamps the piston rod of the drive piston for reliable position clamping

Pre-assembled pressure maintenance valve (incl. hosing) for temporary force and position maintenance in case of pressure failure.

1) SDV-P 10-E incl. hosing



Option positions

1) Position 1.1
2) Position 2.2
3) Name plate with engraved ID

The gripper can optionally be equipped with stroke limitation. With freely positionable end stops, the stroke of the gripper can be limited for specific applications or workpieces. Opening or closing direction or both directions can be optionally limited.

1) Freely positionable end stops
2) Stop mounted on the base jaw

Optional mounting options on the gripper for customized additional attachments such as cameras, sensor distributors or blow-out nozzles.

1) Connection thread for additional attachment
2) Fit for centering pins

Due to the external attachment of up to ten inductive proximity switches on up to four gripper sides, a corresponding number of positions can be monitored.

1) Mounted attachment kit for inductive proximity switches (incl. C-rail for mounting the sensor bracket, sensor brackets in selected quantity as well as mounting material)
2) Sensor (separately selectable)



Option positions

1) Position 1.1

Due to the external attachment of up to ten inductive proximity switches on up to four gripper sides, a corresponding number of positions can be monitored.

1) Mounted attachment kit for inductive proximity switches (incl. C-rail for mounting the sensor bracket, sensor brackets in selected quantity as well as mounting material)
2) Sensor (separately selectable)



Option positions

1) Position 1.2

Due to the external attachment of up to ten inductive proximity switches on up to four gripper sides, a corresponding number of positions can be monitored.

1) Mounted attachment kit for inductive proximity switches (incl. C-rail for mounting the sensor bracket, sensor brackets in selected quantity as well as mounting material)
2) Sensor (separately selectable)



Option positions

1) Position 2.1

Due to the external attachment of up to ten inductive proximity switches on up to four gripper sides, a corresponding number of positions can be monitored.

1) Mounted attachment kit for inductive proximity switches (incl. C-rail for mounting the sensor bracket, sensor brackets in selected quantity as well as mounting material)
2) Sensor (separately selectable)



Option positions

1) Position 2.2

The "inductive position measuring system" option enables the entire stroke of the gripper to be queried by analog means.

1) Attachment kit for inductive position measuring system



Option positions

1) Position 1.1
2) Position 2.2
3) Name plate with engraved ID