기능
Sectional diagram
Sectional diagram
The electric drive consists of a primary part (motor coil) and a secondary part (permanent magnets). The phase and the amplitude of the applied electrical current are regulated in the controller. Depending on the application, this sets the profile fitted with magnets in motion or moves the slides of the axis.
- 1
-
Aluminum extruded profile
Flat and weight-optimized - 2
-
Pre-loaded profiled rail guide with recirculating ball-bearing guides
for optimal guidance properties and speeds - 3
-
Integrated secondary parts
with high power magnets - 4
-
Compact primary part slide
with mounting surfaces, guidance adjusted without play and integrated measuring system - 5
-
End plates
with integrated shock absorber elements - 6
-
Motor plug
Position right/left can be selected - 7
-
Measuring system plug
Position right/left can be selected
사용자 정의 선형 축을 위한 크기 조정 지원 및 구성
리니어 다이렉트 축의 디자인
모듈형 변환기 시스템
Pneumatic holding brake
Drag chain
Covering tape
UL-certificering
Zware uitvoering/hogesnelheidsvariant
사용자 정의 선형 축을 위한 크기 조정 지원 및 구성
SCHUNK 사이징 도우미를 사용하면, 각 애플리케이션에 적합한 특정 제품을 포트폴리오에서 안정적으로 선택할 수 있습니다. 구성 가능한 표준 제품으로 시스템 계획의 복잡성을 줄이고 광범위한 개별 조정 옵션을 제공합니다. 단 몇 번의 클릭으로 리니어 모듈을 10분 이내에 개별 요구 사항에 맞게 조정할 수 있어서 더욱 광범위한 응용 분야를 제공합니다. SCHUNK Engineering은 구성 가능한 표준 제품 외에도 맞춤형 솔루션을 제공합니다. 언제든지 문의해 주세요!
리니어 다이렉트 축의 디자인
선형 직접 축 SLD는 통합된 기본 구성 요소와 측정 시스템를 포함한 모터 슬라이드로 구성됩니다. 보조 파트는 영구적인 자석으로 구성되어 있으며, 리니어 축의 알루미늄 압출 프로필에 통합됩니다.
- 1
-
알루미늄(압출형)
- 2
-
영구 자석
- 3
-
모터 슬라이드
모듈형 변환기 시스템
리니어 모듈은 다른 경로 측정 시스템과 함께 제공됩니다. 증분형 경로 측정 시스템은 1Vss 인터페이스를 보유합니다. 절대 경로 측정 시스템은 HIPERFACE®, HIPERFACE DSL®, DRIVE-CLiQ 또는 EnDat 2.2 인터페이스와 함께 옵션으로 이용할 수 있습니다. 요청에 따라 다른 인터페이스도 사용 가능합니다.
- 1
-
모터 슬라이드에 고정된 측정 시스템 판독 헤드
- 2
-
알루미늄 압출 프로파일에 고정된 측정 시스템의 측정 테이프
Pneumatic holding brake
Optionally, the linear axis can be delivered with a safety holding brake. This holding brake is pneumatically actuated. Its function is activated in a non-ventilated state. The holding brake is used to maintain the position of the linear axis in a currentless condition. The holding brake is also suitable for applications in the field of machine safety. Please feel free to contact us.
- 1
-
Holding brake, operated pneumatically
Drag chain
Matching cable tracks are available as accessories for the linear axes. (Similar to illustration). These are adapted to the respective effective stroke, supplied incl. mounting material, and if necessary, pre-assembled.
- 1
-
Drag chain
Covering tape
Optionally, the linear axis can be delivered equipped with a covering tape. This prevents dirt from entering the inside of the axis and at the same time prevents grease from escaping when the axis is mounted horizontally or vertically.
- 1
-
Afdekband
UL-certificering
De motor van de lineaire directe as is standaard UL-gecertificeerd. Het UL-veiligheidsmerk maakt snelle markttoegang tot Noord-Amerika en andere landen mogelijk. UL-certificaten worden per product toegekend en periodiek door UL herzien. Niet alleen het eindproduct wordt getest, maar ook de fabricage van het product.
Zware uitvoering/hogesnelheidsvariant
De SLD-as is verkrijgbaar in een heavy-dutyversie voor toepassingen met hogere eisen op het gebied van basisbelastbaarheid, stijfheid en smeerintervallen. Vanaf maat SLD 22 wordt de profielrail vervangen door een grotere versie met hogere basisbelastingen en worden zowel het geëxtrudeerde profiel als de geleiders dienovereenkomstig aangepast.
Op basis van de heavy-dutyversie is er een hogesnelheidsvariant met snelheden tot 10 m/s beschikbaar.
적용 예시
적용 예시
전기 모터의 자동 생산용 스테이터 안에 헤어핀을 빠르고 정확하게 배치하기 위해 핸들링 유닛은 매우 유연합니다.
- 1
-
线性直轴 SLD
- 2
-
LDN 通用线性模块
- 3
-
二指平动机械手 PGN-plus-P