Funkce
Průřezový diagram
Průřezový diagram
Elektrický pohon se skládá z primární části (cívka motoru) a sekundární části (permanentní magnety). V ovladači se reguluje fáze a amplituda používaného elektrického proudu. V závislosti na aplikaci to způsobuje pohyb profilu opatřeného magnety nebo pohyb pojezdu osy.
- 1
-
Hliníkový extrudovaný profil
Plochý a hmotnostně optimalizovaný - 2
-
Předpjaté vedení profilového pojezdu s recirkulačním kuličkovým ložiskem
pro optimální vlastnosti vedení a rychlosti - 3
-
Integrované sekundární díly
s vysoce výkonnými magnety - 4
-
Kompaktní primární díl pojezdu
s montážními plochami, bezvůlovým nastavitelným vedením a integrovaným měřicím systémem - 5
-
Koncové desky
s integrovanými prvky tlumičů nárazů - 6
-
Motor plug
Lze si vybrat polohu vpravo/vlevo - 7
-
Measuring system plug
Position right/left can be selected
Product finding and configuration for customized linear axes
Design of the linear direct axis
模块化传感器系统
气动止动闸
Drag chain
Cover plate
UL certification
Heavy-duty version/high-speed variant
Product finding and configuration for customized linear axes
The SCHUNK product finder makes it easy to reliably select the right specific products from the portfolio for each application. With our configurable standard products, we reduce complexity in system planning and offer a large number of individual adaptation options. In just a few clicks, linear axes can be adapted to individual requirements in less than 10 minutes, opening up an even wider range of applications. In addition to configurable standard products, SCHUNK Engineering offers customized solutions – feel free to contact us!
Design of the linear direct axis
The linear direct axis SLD consists of a motor slide with an integrated primary component and a measuring system. The secondary component consists of permanent magnets and is integrated into the aluminum extruded profile of the linear axis.
- 1
-
Aluminum extruded profile
- 2
-
Permanent magnets
- 3
-
Motor slide
模块化传感器系统
这款线性模块可提供不同的路径测量系统。增量式行程测量系统带有一个 1Vss 接口。绝对路径测量系统可选配:HIPERFACE®、HIPERFACE DSL®、DRIVE-CLiQ 或 EnDat 2.2 接口。其他接口可按需提供。
- 1
-
测量系统读取头,固定在电机滑块侧
- 2
-
测量系统的测量条带,固定在铝挤压型材上
气动止动闸
该线性模块可装配安全止动闸。该止动闸采用气动驱动。其功能在无通气状态下启动。止动闸用于在无供电条件下保持线性模块的位置。止动闸同样适用有设备安全的相关应用。请联系我们了解详细信息。
- 1
-
Holding brake, operated pneumatically
Drag chain
Matching cable tracks are available as accessories for the linear axes. (Similar to illustration). These are adapted to the respective effective stroke, supplied incl. mounting material, and if necessary, pre-assembled.
- 1
-
Drag chain
Cover plate
Optionally, the linear axis can be delivered equipped with a covering tape. This prevents dirt from entering the inside of the axis and at the same time prevents grease from escaping when the axis is mounted horizontally or vertically.
- 1
-
Cover plate
UL certification
The motor of the linear direct axis is UL-certified as standard. The UL safety mark allows for rapid market access to North America and other countries. UL certifications are awarded on a product-by-product basis and are periodically reviewed by UL. Not only the final product is tested, but also the manufacturing of the product.
Heavy-duty version/high-speed variant
The SLD axis is available in a heavy-duty version for applications with increased requirements in terms of basic load ratings, rigidity and lubrication intervals. From size SLD 22 and up, the profiled rail is replaced by a larger version with higher basic load ratings, and both the extruded profile and the slides are adapted accordingly.
Based on the heavy-duty version, a high-speed variant with speeds of up to 10 m/s is available.
Application example
Application example
Highly flexible handling unit for fast and precise placement of hairpins in a stator for the automated production of electric motors.
- 1
-
线性直轴 SLD
- 2
-
LDN 通用线性模块
- 3
-
二指平动机械手 PGN-plus-P