APS-Z80
Détecteur de position analogique
Le capteur analogique APS-Z80 est utilisé pour détecter la position du mors des pinces SCHUNK. Il détecte de manière inductive la position d'un plan incliné et fournit un signal de sortie continu.
Description
Vorteile – Ihr Nutzen
- Analoge Multi-Positionsabfrage für beliebig viele Positionen
für Flexibilität in allen Automatisierungslösungen - Genaues Messsystem
für zuverlässiges Teilehandling in kompakten Anlagen - Kompakte Bauweise
für platzsparende Handhabung ohne Störkonturen - Integrierte Elektronik
trotz platzsparender Außenkontur, ermöglicht eine flexible Kabelkonfektion - Ausführung mit Standard-Steckverbinder
für einfache und schnelle Austauschbarkeit des Verlängerungskabels - Hochflexibles Kabel in PUR-Ausführung
für eine lange Lebensdauer
Options and special information
- Versions with connector or cable end
The sensor is available in the versions with a plug connector (30 cm cable, M8 connector) or open cable outlet (2 m cable, open wire strands). - Attachment kits
One attachment kit is required per gripper for the APS system. A suitable attachment kit can be found in the relevant section of the catalog for the gripper in question. - High protection class
IP67 when plugged in, for use in clean or dusty environments or in case of contact with water. Operability in case of contact with other media (coolant, acids, bases, etc.) is often given, however cannot be guaranteed by SCHUNK. - Shielding of a cable extension
Shielded cables are recommended if the analog signal is routed via cable extensions. The cable must be shielded on one end.