WEL HSK-A 50 Ø8x65
侧固式刀柄
ID 263511
WEL HSK-A 50 Ø8x65, Toolholders
- WELDON end mill holders
- Series: WELDON
- Toolholder interface: HSK-A 50
- Clamping diameter: 8 mm
- Projecting length: 65 mm
- Run-out accuracy: ≤ 0.003 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
技术细节
| Technologie | WELDON Flächenspannfutter |
|---|---|
| Baureihe | WELDON |
| Werkzeughalterschnittstelle | HSK-A 50 |
| Werkzeughalternorm | DIN ISO 12164-1 |
| Spanndurchmesser D1 | 8 mm |
| D2 [mm] | 28.0 |
| D6 [mm] | 19.5 |
| Auskraglänge L1 [mm] / [inch] | 65 mm / 2.6" |
| L2 [mm] | 35.0 |
| L4 [mm] | 39.0 |
| G1 | M8 |
| Gewicht [kg] | 0.58 |
| Kühlmitteldicht | ja |
| Standardlänge | ja |
型号
用于夹持圆柱柄的刀具，符合 DIN 1835B/6359HB 标准
回转精度
从锥体到 D1 测量 ≤ 0.003 mm
平衡等级
转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
螺纹 G1
G1 = 夹紧螺钉的螺纹
RAM 数据采集器
符合 DIN 69873 规定的钻孔用于安装数据芯片
刀柄更换
对于自动更换刀柄
标配范围
含 WELDON 侧固式夹持螺钉
单独
可按照客户要求，提供其他尺寸和订制设计