TENDO P CAT 40 Ø12x2 1/2"
Hydrodehnspannfutter
Ident.-Nr. 1447890
TENDO P CAT 40 Ø12x2 1/2", Werkzeughalter
- Hydrodehnspannfutter
- Baureihe: TENDO Platinum
- Werkzeughalterschnittstelle: CAT 40
- Spanndurchmesser: 12 mm
- Auskraglänge: 63.5 mm
- Rundlaufgenauigkeit: < 0,003 mm bei 2,5 x D
- Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
- Min. Drehmoment: 90 Nm
Technische Details
| Technologie | Hydrodehnspannfutter |
|---|---|
| Baureihe | TENDO Platinum |
| Werkzeughalterschnittstelle | CAT 40 |
| Werkzeughalternorm | ASME B5.50 |
| Spanndurchmesser D1 | 12 mm |
| D2 [mm] | 32.0 |
| D3 [mm] | 49.0 |
| D6 [mm] | 27.1 |
| Auskraglänge L1 [mm] / [inch] | 63,5 mm / 2.5" |
| L2 [mm] | 46.0 |
| L3 [mm] | 10.0 |
| L4 [mm] | 26.0 |
| L5 [mm] | 44.45 |
| G | M10x1 |
| Min. Drehmoment [Nm] | 90.0 |
| Gewicht [kg] | 1.1 |
| Kühlmitteldicht | ja |
| Standardlänge | ja |
Version
Short, rigid design
Run-out accuracy
< 0.003 mm at 2.5 x D
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Intermediate sleeves
Additional shank diameters can be clamped using intermediate sleeves
Data carriers
Bore hole for data carriers available as standard
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ASME B5.50
Bores for form AF are sealed with set-screws as transport safety
Length-setting screw
With adjustment screw for axial length adjustment
Scope of delivery
Does not include an actuation key
Individual
Additional sizes and customized designs are available upon request
TENDO Platinum with Cool Flow available on request