AGM-Z 050
ID 1575965
- 補正方向: Z
- 補正Z: 6 mm
Technical details
| 補正Z [mm] | 6.0 |
|---|---|
| ロック機構収納 [N] | 550.0 |
| ロック機構伸長 [N] | 700.0 |
| 最小スプリング力 [N] | 29.0 |
| 最大スプリング力 [N] | 65.0 |
| 最低作動圧力 [bar] | 2.5 |
| 最大作動圧 [bar] | 6.5 |
| 呼び作動圧力 [bar] | 6.0 |
| 繰り返し精度 [mm] | 0.02 |
| ロボット側接続 | ISO 9409-1-50-4-M6 |
| ツール側接続 | ISO 9409-1-50-4-M6 |
| 重量 [kg] | 1.0 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 60.0 |
| 流体消費 [cm³] | 20.0 |
| 引き出し時間 [s] | 0.2 |
| 引き込み時間 [s] | 0.2 |
| エア接続のロックと解除 | M5 |
| 最大偏心荷重 [mm] | 230.0 |
| IP 保護等級 | 50 |
| 静的最大モーメント Mx/My [Nm] | 35.0 |
| 静的最大モーメント Mz [Nm] | 60.0 |
| 最大静的力 Fx/Fy [N] | 300.0 |
| 最大静的力 Fz [N] | 300.0 |
| 動的最大モーメント Mx/My [Nm] | 11.4 |
| 動的最大モーメント Mz [Nm] | 17.5 |
| 力 Fx 最大 動的 [N] | 150.0 |
| 力 Fy 最大 動的 [N] | 150.0 |
| 力 Fz 最大 動的 [N] | 150.0 |
| 最大力 Fd [N] | 900.0 |
最大荷重
偏差
AGM-Z たわみ図–水平構造
最大荷重
これは、補正ユニットに作用することが許容されるすべての静的負荷の合計です。
偏差
AGM-Z たわみ図–水平構造
- X-axis:
- 重心距離
- Y-axis:
- 偏差
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Fluid consumption
refers to the air consumption per one retraction and extension cycle
Guidance system
Ball guides
Monitoring
via magnetic switch or inductive proximity sensor
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
hard anodized aluminum alloy, functional parts made of hardened steel
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months