GSW-B-AGE-XYZ 150
Shaft interface for grippers
ID 308436
Shaft interface for grippers GSW-B-AGE, Size: 150, pneumatic, hydraulic
- Max. ambient temperature: 90 °C
- Shank diameter: 20 mm
Technical details
| Weight [kg] | 1.1 |
|---|---|
| Max. permissible RPM [1/min] | 20.0 |
| Nominal operating pressure compressed air [bar] | 6.0 |
| Minimum operating pressure compressed air [bar] | 4.0 |
| Max. operating pressure of the compressed air [bar] | 8.0 |
| Nominal operating pressure coolant [bar] | 40.0 |
| Min. operating pressure coolant [bar] | 20.0 |
| Max. operating pressure of the coolant [bar] | 50.0 |
| Min. ambient temperature [°C] | 5.0 |
| Max. ambient temperature [°C] | 90.0 |
| Compensation XY [mm] | 1.5 |
| Compensation Z [mm] | 2.7 |
| Angular deflection [°] | 5.5 |
| Deflection rotatory [°] | 3.5 |
| Rotary compensation torque [Nm] | 0.2 |
| Diameter D [mm] | 90.0 |
| Height Z [mm] | 129.1 |
| Moment Mx max. [Nm] | 40.0 |
| Moment My max. [Nm] | 60.0 |
| Moment Mz max. [Nm] | 40.0 |
| Force Fz max. [N] | 1100.0 |
The values only refer to the adapter GSW-B-AGE with compensation unit.
The appropriate gripper has to be ordered separately.
Refer to the following pages for gripper-specific values.
The appropriate gripper has to be ordered separately.
Refer to the following pages for gripper-specific values.
치수 및 최대 로드
Compensation angle
Compensation travel
치수 및 최대 로드
힘과 토크에 대한 그리퍼의 각 크기를 참조하십시오.
Compensation angle
- X-axis:
- Compensation angle
- Y-axis:
- Reset moment
Compensation travel
- X-axis:
- Compensation travel
- Y-axis:
- 리셋 포스
시리즈에 관한 일반 참고 사항
파지력
GSW-B와 그에 상응하는 그리퍼의 조합을 말하며 최소의 충분한 파지력을 나타냅니다.
핑거 길이
주 축을 바라보는 P 거리처럼 참조면에서 측정됩니다.
반복 정밀도
100회 연속 스트로크 동안의 말단 위치 분포로 정의됩니다.
폐쇄 및 개방 횟수
표시된 시간은 유속과 드라이브 미디엄의 압력, 그 과정에서 발생하는 전기적 저항에 따라 결정됩니다.
작동 원리
압력 분배기 및 쐐기 후크 역학
하우징 재료
알루미늄 합금, 양극 처리
베이스 죠 재료
검은 강철
스핀들 인터페이스 재료
알루미늄 합금
작동
기계 냉각수(필터됨, 최대 30µm 입자 크기)의 유압 방식 또는 ISO 8573-1:2010 [7:4:4]에 따른 필터 압축 에어의 공압 방식
보증
24개월
서비스 수명 특징
요청 시
제공 범위
고정 나사, 센터링 엘리먼트, 조립 지침(법인 선언문을 포함한 작동 매뉴얼은 온라인에서 확인 가능) 그리퍼는 포함되어 있지 않으며 원하는 버전으로 별도로 주문해야 합니다.