KSP3-LH 100-Z-AS-PM-BWA
Pneumatische Kraftspannblöcke mit Backenschnellwechselsystem
ID 1479161
Pneumatischer Kraftspannblock Standard
Produktmerkmale:
Produktmerkmale:
- 2-Backen-Kraftspannblock
- Zentrisch spannend
- Langhub
- Koordinatengefertigte Absteckbohrungen
- Spannkraftverstärkung/Außensicherung
- Pneumatische Endlagenkontrolle
- Pneumatische Anlagekontrolle
- Grundbacken: Backenschnellwechsel
- Abmessungen: 100 x 100 x 88 mm
- Spannkraft bei max. Betriebsdruck: 8 kN
- Zusätzliche Spannkraft aus Federpaket: 1 - 2.5 kN
- Hub pro Backe: 6 mm
- Max. Backenhöhe: 27 mm
- Wiederholgenauigkeit: 0.01 mm
- Betriebsdruck: 3 - 9 bar
- Luftverbrauch pro Doppelhub bei 6 bar: 1000 cm³
- Schließ-/Öffnungszeit: 0.2 s
- Gewicht: 4 kg
Technical details
| Stroke per jaw [mm] | 6.0 |
|---|---|
| Clamping force at max. operating pressure [kN] | 8.0 |
| Min. additional clamping force resulting from spring assembly [kN] | 1.0 |
| Max. additional clamping force resulting from spring assembly [kN] | 2.5 |
| Min. operating pressure [bar] | 3.0 |
| Max. operating pressure [bar] | 9.0 |
| Repeat accuracy of vise [mm] | 0.01 |
| Max. jaw height [mm] | 27.0 |
| Distance H [mm] | 14.5 |
| Air consumption per double stroke at 6 bar [cm³] | 1000.0 |
| Closing/opening time [s] | 0.2 |
| Weight [kg] | 4.0 |
Scope of delivery
Clamping force block, mounting screws, cover plugs, clamping sleeves, fitting screws, operating manual
Clamping force
The clamping force is the arithmetic sum of the individual forces occurring at the jaws at distance "H" at maximum pressure.
Height tolerance of the vise
±0.04 mm.
Clamping force blocks with the same height are available on request.
Repeat accuracy
Results from the end position spread after 100 consecutive strokes
Maintenance and repair
For the maintenance of TANDEM vises, our special grease LP 410 should be used (ID 0184213)