TENDO Zero CAT40 Ø5/8"x4"
Hydraulic expansion toolholder
ID 0203654Z
This product has been discontinued and is no longer available.
TENDO Zero CAT40 Ø5/8"x4", Toolholders
- Hydraulic expansion toolholder
- Series: TENDO Zero
- Toolholder interface: CAT 40
- Clamping diameter: 5/8"
- Projecting length: 101.6 mm
- Run-out accuracy: < 0.003 mm at 2.5 x DRun-out accuracy of 0 microns, adjustable
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
- Min. torque: 185 Nm
Technical details
Technology | Hydraulic expansion toolholder |
---|---|
Series | TENDO Zero |
Toolholder interface | CAT 40 |
Toolholder standard | ASME B5.50 |
Clamping diameter D1 | 5/8" |
D2 [mm] | 38.0 |
D3 [mm] | 44.45 |
D6 [mm] | 33.5 |
Projecting length L1 [mm]/[inch] | 101,6 mm / 4.0" |
L2 [mm] | 49.0 |
L3 [mm] | 10.0 |
L4 [mm] | 50.0 |
L5 [mm] | 82.55 |
G | M10x1 |
Min. torque [Nm] | 185.0 |
Weight [kg] | 2.0 |
Version
Short, slim design
Run-out accuracy
< 0.003 mm at 2.5 x D
Run-out accuracy of 0 microns, adjustable
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Tool shank quality
h6
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ASME B5.50
Bores for form AF are sealed with set-screws as transport safety
Length-setting screw
With adjustment screw for axial length adjustment
Scope of delivery
Including hexalobular socket wrench for TENDO Zero, without actuation key
Individual
Additional sizes and customized designs are available upon request