AGE-S-XY-200-P
ID 324603
- Kompenzace XY: ± 12 mm
- Hmotnost obrobku: 160 kg
- Síla pístu - paměť polohy: 4500 N
- Max. síla Fz : 2000 N
- Max. síla Fd: 4000 N
Technical details
| Kompenzace XY [mm] | ± 12 |
|---|---|
| Doporučená manipulační hmotnost, svisle [kg] | 160.0 |
| Doporučená manipulační hmotnost, vodorovně [kg] | 100.0 |
| Uzamykací síla [N] | 2700.0 |
| Síla pístu - paměť polohy [N] | 4500.0 |
| Max. radiální síla, uložení polohy [N] | 492.0 |
| Min. provozní tlak [bar] | 2.5 |
| Max. provozní tlak [bar] | 8.0 |
| Jmenovitý provozní tlak [bar] | 6.0 |
| Opakovatelná přesnost [mm] | 0.1 |
| Montáž na straně robotu | ISO 9409-1-200-6-M12 |
| Montáž na straně nástroje | ISO 9409-1-200-6-M12 |
| Vlastní hmotnost [kg] | 21.0 |
| Min. okolní teplota [°C] | 5.0 |
| Max. okolní teplota [°C] | 60.0 |
| Délka X [mm] | 270.0 |
| Šířka Y [mm] | 250.0 |
| Výška Z [mm] | 118.0 |
| Max. moment Mx [Nm] | 500.0 |
| Max. moment My [Nm] | 500.0 |
| Max. moment Mz [Nm] | 250.0 |
| Max. síla Fz [N] | 2000.0 |
| Max. síla Fd [N] | 4000.0 |
Rozměry a maximální zatížení
Rozměry a maximální zatížení
Toto je max. součet všech momentů a zatížení (akcelerační síly a momenty, procesní síly atd.), které mohou působit na kompenzační jednotku tak, aby byla zajištěna její bezchybná funkce.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Guidance system
robust linear guidances
Monitoring
XY locking and unlocking via a magnetic switch and Z-stroke via inductive proximity switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Compensation unit in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months