arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
TENDO LSS

TENDO LSS

Hydraulic Expansion Toolholders
TENDO LSS negotiates the obstacles posed even by trickiest of tasks, when machining at the narrowest of angles and where workpieces are difficult to access. Due to the high stability and high radial rigidity, the super-slim toolholder is ideally suitable for boring, reaming, and finish milling machining operations.

Advantages – Your benefits

  • Optimized interfering contours
    Excellent workpiece accessibility
  • Permanent run-out and repeat accuracy of ≤ 0.006 mm
    Even cutting action, increased tool service life, and reduced costs for regrinding or buying new tools
  • Excellent vibration damping
    Micro-blowouts are prevented, best workpiece surfaces, machine spindle protection, increased tool service life resulting in cost reductions
  • Micron precise tool change in seconds without peripheral equipment
    Time saving through reduction of set-up time and no investment and energy costs due to additional clamping devices
  • Exact axial length preadjustment
    Length adjustment in the range of 0.01 mm accuracy, with adjustment travel of 10 mm
  • Fine-balanced by default
    Suitable for high speeds with a balancing grade of G2.5 at 25,000 RPM
  • Broad compatibility
    Can be ideally combined with TENDO SVL and TRIBOS SVL extensions
  • High degree of flexibility
    Clamping of different diameters due to the use of slotted or coolant-proof intermediate sleeves
  • Dirt grooves for reliable torque transmission
    Dry clamping surfaces, by displacement of oil, grease or lubricant residues into the dirt groove
  • All commercially available tool shank types can be clamped
    Form A: with smooth cylindrical shank, shank form A in accordance with DIN 1835 and DIN 6535 HA Form AB: with flat face and cylindrical shank with pulling face, shank form B in accordance with DIN 1835 and DIN 6535 HB Form B: with lateral pulling faces, shank form B in accordance with DIN 1835 Form E: with inclined clamping face, shank form E in accordance with DIN 1835 and DIN 6535 HE