DDF-SE-080
ID 323280
- フルードフィードスルーの数: 4
- 電気フィードスルーの数: 6
- 力 Fz 最大: 2000 N
技術的詳細
| 最大駆動速度 [1/min] | 500.0 |
|---|---|
| 連続トルク [Nm] | 4.0 |
| 開始トルク [Nm] | 6.0 |
| 回転角度 [°] | > 360 |
| フルードフィードスルーの数 | 4.0 |
| 1 接続あたりの最大圧力 [bar] | 10.0 |
| 電気フィードスルーの数 | 6.0 |
| 最大電圧 [V] | 60.0 |
| 最大電流 [A] | 1.0 |
| 重量 [kg] | 3.3 |
| 最低周囲温度 [°C] | 5.0 |
| 最高周囲温度 [°C] | 60.0 |
| 長さ X [mm] | 80.0 |
| 幅 Y [mm] | 80.0 |
| 高さ Z [mm] | 127.0 |
| 最大静止曲げモーメント Mx [Nm] | 60.0 |
| 最大静止曲げモーメント My [Nm] | 60.0 |
| モーメント Mx 最大 [Nm] | 50.0 |
| トルク My 最大 [Nm] | 50.0 |
| 力 Fz 最大 [N] | 2000.0 |
Dimensions and maximum loads
シールの寿命
Dimensions and maximum loads
This is the max. total of all loads (acceleration forces and torques, process forces, emergency stops, etc.), which can affect a rotary feed-through, in order to ensure error-free function.
シールの寿命
シールの寿命(6bar圧力);例: DDF-080 SE は、3 シフト稼働 (24 時間) で、一定の 150 rpm で駆動されます。シールの寿命:シールは 1,500 時間後に交換する必要があります。(SCHUNK 製シールセットをご利用いただけます)
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Mounting
Bores and threads for stationary use
Media transmission
Pneumatic and electrical signals
Housing
The housing consists of high-strength, hard-coated aluminum alloy. The functional components are made of hardened steel.
Scope of delivery
Rotary feed-through in the ordered variant, elements for mechanical connection and safety information. Product-specific instructions can be downloaded at schunk.com/downloads-manuals.
Warranty
24 months