RotoRi
Jaw turning fixture
Turning out chuck jaws precisely under clamping pressure and grinding out hard chuck jaws is possible using the SCHUNK RotoRi turning set. The set consists of individual rings in different dimensions, allowing continuous adjustment of the desired clamping diameter. It is used in manual and power chucks, and is suitable for 2, 3, 4 and 6 lathe chucks, for both I.D. and O.D. clamping.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Using curve segments with infinite adjustment possibilities, precisely the right amount of material can be removed as required. RotoRi turning sets are available as standard and premium variants: the RotoRi premium variants contain instead of the standard clamping pins, the patented RotoFix clamping pins, which seamlessly offset tolerances of countersunk screws through 2 mm adjustment range.
In addition, all versions from RotoRi LX upwards include rings in a reinforced design.
Description
利点と特長
- 適応性が向上
1 個のリングで内径および外径をクランプ - 幅広い応用分野
チャックサイズ 80～1,600 mm に対応、2、3、4、6 ジョー式チャック用 - 卓越した精確さ
旋削径を 0.1 mm 単位で高精度調整 - 経済効率の向上
RotoFix クランプピンによるセットアップコストの削減とチャックジョーのコスト削減 - 迅速柔軟なハンドリング
旋削用ツールの最適なアクセス性