arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
iTENDO² SK 40 Ø20x110 Illustration similar

iTENDO² SK 40 Ø20x110

Sensory toolholder, components and accessories

ID 1484710

In stock
iTENDO² SK 40 Ø20x110
  • Series: iTENDO²
  • Toolholder interface: SK 40
  • Clamping diameter: 20 mm
  • Projecting length: 110 mm
  • Run-out accuracy: < 0.003 mm at 2.5 x D
  • Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
  • Min. torque: 330 Nm
  • Not included in the scope of delivery: Does not include an actuation key
  • Precondition: iTENDO² pad or iTENDO² easy connect is necessary for the use of the iTENDO² toolholder.
テクノロジー センサー式ツールホルダー、コンポーネント & アクセサリー
シリーズ iTENDO²
ツールバーインターフェース SK 40
ツールホルダーの標準 DIN ISO 7388-1 AD
クランプ径 D1 20 mm
D2 [mm] 42.05
D3 [mm] 49.25
D6 [mm] 37.65
突出長さ L1 [mm] 110.0
L2 [mm] 51.0
L3 [mm] 8.0
L4 [mm] 33.5
L5 [mm] 91.0
G M8x1
最小トルク [Nm] 330.0
重量 [kg] 1.85
電池の製品寿命 [h] 10
加速度センサー* 100.0
最大回転速度 [1/min] 30000.0
外部冷却/内部冷却 [bar] 80.0
iTENDO² ツールホルダーは、iTENDO² パッケージ (例:iTENDO²パッド) との組み合わせでのみ使用できます。
* g=9,81m/s2

振れ精度
< 0.003 mm、2.5 x D で

バランスグレード
25,000 RPM または Umax < 1 gmm 時に G2.5

ツールシャンク等級
h6

中間スリーブ
追加シャンクの直径は中間スリーブを用いてクランプ可能

データキャリア
データキャリアの取付け用穴、オプション

ツールホルダー交換
自動によるツールホルダー交換向け

クーラント供給
ISO 7388 AD 準拠のクーラント供給

長さ設定用ネジ
軸方向長さ調整のための調整ネジあり

個別
その他のサイズや特殊設計もご要望により承ります。