arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
TRIBOS-RM HJND 50 Ø6x45 Illustration similar

TRIBOS-RM HJND 50 Ø6x45

Polygonal toolholders

ID 1355378

TRIBOS-RM HJND 50 Ø6x45, Toolholders
  • Polygonal toolholders
  • Series: TRIBOS-RM
  • Toolholder interface: HJND 50
  • Clamping diameter: 6 mm
  • Projecting length: 45 mm
  • Run-out accuracy: ≤ 0.01 mm of 4 x D
  • Balancing grade: Residual imbalance 2 gmm/kg
  • Min. torque: 5 Nm
Technology Polygonal toolholders
Series TRIBOS-RM
Toolholder interface HJND 50
Clamping diameter D1 6 mm
D2 [mm] 14.0
D3 [mm] 17.5
D4 [mm] 19.0
D5 [mm] 23.0
L [mm] 64.5
Projecting length L1 [mm]/[inch] 45 mm / 1.8"
L2 [mm] 40.0
L4 [mm] 30.0
L5 [mm] 35.0
L6 [mm] 37.0
G M8
Min. torque [Nm] 5.0
Wrench size A/F 16.0
Max. tightening torque [Nm] 8.0

Version
The following reduction insert is suitable alternative for lateral joining: TRIBOS-RM SRE SO 14 (1351506)

Run-out accuracy
≤ 0.01 mm of 4 x D

Balancing grade
Residual imbalance 2 gmm/kg

Tool shank quality
h6

Length-setting screw
Without adjustment screw for axial length adjustment
The minimum clamping depth is 25 mm
The maximum clamping depth is L2 = 40 mm

Individual
Additional sizes and customized designs are available upon request