WELDON
WELDON end mill holders
WELDON end mill holders can be used to reliably clamp tools with a lateral clamping face on the cylindrical shank. Due to the clamping screw of the mounting, the tool cannot twist or pull out. The mounting is suitable for clamping tools with cylindrical shanks in accordance with DIN 1835B and DIN 6535HB. The clamping screw is included in the scope of delivery.
The WELDON Cool Flow enables peripheral cooling by means of cooling channels in the wall, which can be optionally closed/sealed again with two M3 screws. The coolant is fed directly to the cutting edge of the tool. The WELDON Dual Contact variant with simultaneous taper and flat work surface closes the interface-related gap between tool flange and the front of the machine spindle with the interface of the flat work surface.
The WELDON Cool Flow enables peripheral cooling by means of cooling channels in the wall, which can be optionally closed/sealed again with two M3 screws. The coolant is fed directly to the cutting edge of the tool. The WELDON Dual Contact variant with simultaneous taper and flat work surface closes the interface-related gap between tool flange and the front of the machine spindle with the interface of the flat work surface.