MWK-020-2P-4E
IDnr. 305611
- Aantal vloeistofdoorvoeren: 2
- Aantal elektrische doorvoeren: 4
- Max. totale nuttige last: 0.5 kg
Technische gegevens
| Aanbevolen handlingsgewicht [kg] | 0.5 |
|---|---|
| Rondloopnauwkeurigheid [mm] | 0.1 |
| Gewicht [g] | 7.0 |
| Min./max. afstand bij vergrendeling [mm] | 0.25 |
| Aantal vloeistofdoorvoeren | 2.0 |
| Aantal elektrische doorvoeren | 4.0 |
| Spanning [V] | 24.0 |
| Max. stroom [A] | 1.0 |
| Max. toelaatbare XY-offset [mm] | ± 0.3 |
| Max. toelaatbare hoekoffset [°] | ± 0.8 |
| Diameter D [mm] | 20.0 |
| Hoogte Z [mm] | 5.0 |
| Moment Mx max. [Nm] | 0.5 |
| Moment My max. [Nm] | 0.5 |
| Moment Mz max. [Nm] | 0.2 |
Dimensions and maximum loads
Dimensions and maximum loads
This is the max. sum of all forces and moments which are permitted to act on the change system for ensuring proper functioning.
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Actuation
manual
Operating principle
by turning the locking lever, the head and adapter are locked and unlocked.
Media transmission
Integrated pneumatic and electric feed-throughs
Housing
stainless steel
Scope of delivery
Electrical feed-throughs, O-rings for pneumatic feed-throughs, and small components for mounting
Warranty
24 months