TCU-Z-160-3-MV
ID 324838
- Gewicht werkstuk: 40 kg
- Kracht Fz max.: 400 N
- Kracht Fd max.: 4300 N
Technical details
| Vergrendelend | met vergrendeling |
|---|---|
| Hardheid van het elastomeer [Shore] | 68.0 |
| Uitwijking X [°] | ± 1 |
| Uitwijking Y [°] | ± 1 |
| Uitwijking Z [°] | ± 1 |
| Rondloopnauwkeurigheid [mm] | 0.05 |
| Gewicht [kg] | 1.63 |
| Min. werkdruk [bar] | 4.0 |
| Max. werkdruk [bar] | 8.0 |
| Min. omgevingstemperatuur [°C] | -10.0 |
| Max. omgevingstemperatuur [°C] | 90.0 |
| Vergrendelingsmoment Mx [Nm] | 30.0 |
| Vergrendelingsmoment My [Nm] | 30.0 |
| Vergrendelingsmoment Mz [Nm] | 30.0 |
| Vergrendelingskracht Fz [N] | 400.0 |
| Max. kracht Fz [N] | 4300.0 |
| Directe aansluiting op* | PZN-plus 160 |
| Diameter D [mm] | 160.0 |
| Hoogte Z [mm] | 33.0 |
| Moment Mx max. [Nm] | 150.0 |
| Moment My max. [Nm] | 150.0 |
| Moment Mz max. [Nm] | 120.0 |
Afmetingen en maximaal toegelaten belasting
Deflection
Belastingsdiagram
Maximale uitwijking
Afmetingen en maximaal toegelaten belasting
De krachten en koppels zijn maximumwaarden in ontgrendelde toestand en kunnen tegelijkertijd optreden. In vergrendelde toestand zijn alleen de belastingen als gevolg van het gewicht en de versnelling toelaatbaar.
Deflection
Deflection (fa) dependent upon the length (L) to the center of mass
Belastingsdiagram
- X-axis:
- Max. afstand
- Y-axis:
- Max. handlingsgewicht
Maximale uitwijking
Uitwijken (fa) afhankelijk van de lengte (L) tot het zwaartepunt
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Monitoring
by magnetic switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Material
Elastomer material
Housing
Aluminum alloy
Scope of delivery
Robot-side mounting screws
Warranty
24 months