IN 40-O-M12
Inductive proximity switches
ID 301584
Inductive proximity switch IN
- Number of switching points: 1
- Switching distance: 0.8 mm
- Cylindrical sensor
- Sensor diameter: 4 mm
- Switching type: PNP
- Opener
- Cable length: 30 cm
- Electrical connection: M12 connector, 3-pin
- Nominal voltage: 24 V
Technical details
| Cable diameter D [mm] | 3.3 |
|---|---|
| Cable length L [cm] | 30.0 |
| Weight | 0.02 |
| Max. ambient temperature [°C] | 70.0 |
| Min. ambient temperature [°C] | -25.0 |
| Number of switching points | 1 |
| Measuring principle | inductive |
| Housing material | stainless steel |
| Short circuit protection | yes |
| Protected against polarity reversal | yes |
| Cable sheath material | PUR |
| Cable design (wire cross section/number of wires) | 3x 0.14mm2 |
| Max. operating voltage | 30.0 |
| Protection class IP (sensor, plugged) | 67 |
| Switching function | Opener |
| Switching distance [mm] | 0.8 |
| Switching hysterisis from the nominal switching distance | < 5% |
| Type of switching | PNP |
| Cable connector/cable end | M12 connector, 3-pin |
| Type of voltage | DC |
| Nominal voltage | 24.0 |
| Voltage drop [V] | 0.6 |
| Max. switching current | 0.2 |
| LED display in sensor | yes |
| Max. switching frequency [Hz] | 3000.0 |
| Min. bending radius (dynamic) [mm] | 34.0 |
| Min. bending radius (static) [mm] | 17.0 |
| Min. operating voltage | 10.0 |
| Drilling emulsion resistance * | yes |
*Tested cutting emulsions: r.rhenus TU 43P, Motorex Swisscool Magnum UX 550 and Oemeta 760 (1008339).
General notes about the series
SCHUNK gripping modules, rotary and linear modules, as well as robot accessories should be monitored with the suitable sensors from SCHUNK, since everything is adjusted to each other.
If the key characteristics such as switching distance, switching function, hysteresis, and voltage are sufficiently similar, proximity switches from other manufacturers can generally be used instead of the inductive proximity switches (IN, INK) from SCHUNK.
Sensors of other manufacturers which are integrated into SCHUNK products, seldom provide excellent switching results. Moreover, we cannot ensure proper function or functional safety of them.