ER 11 Mini SCAPTO C6x100
ER collet chuck Mini
N.º de identificação 23005118
ER 11 Mini SCAPTO C6x100, Toolholders
- ER collet chuck Mini
- Series: ER collet chuck Mini
- Toolholder interface: SCHUNK CAPTO C6
- Projecting length: 100 mm
- Run-out accuracy: ≤ 0.008 mm at 2.5 x D
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Detalhes técnicos
| Technology | ER collet chuck Mini |
|---|---|
| Series | ER collet chuck Mini |
| Toolholder interface | SCHUNK CAPTO C6 |
| Toolholder standard | ISO 26623-1 |
| ER clamping size | ER 11 |
| Min. clamping diameter D1 [mm] | 1.0 |
| Max. clamping diameter D1 [mm] | 7.0 |
| D2 [mm] | 16.0 |
| D3 [mm] | 16.0 |
| Projecting length L1 [mm]/[inch] | 100 mm / 3.9" |
| Projecting length L1 [mm] | 100.0 |
| L4 [mm] | 12.0 |
| L5 [mm] | 75.5 |
| G | M8x1 |
| Weight [kg] | 0.94 |
| Coolant-proof | yes |
| Standard length | yes |
These product variants are suitable for both milling as well as turning centers
回转精度
2.5 x D 处 ≤ 0.008 mm
平衡等级
转速为 25,000 RPM 时动平衡等级达到 G2.5 或 Umax < 1 gmm
RAM 数据采集器
符合 DIN 69873 规定的钻孔用于安装数据芯片
刀柄更换
对于自动更换刀柄
长度调节螺钉
带螺纹，用于安装调节轴向长度的调节螺钉，但未附带调节螺钉
标配范围
包括夹紧螺母
单独
可按照客户要求，提供其他尺寸和订制设计