KOM HSK-A 63 Ø16x60
Nástrčné tŕne pre kombinované frézy
ID 263610
KOM HSK-A 63 Ø16x60, Upínače nástrojov
- Nástrčné tŕne pre kombinované frézy
- Konštrukčný rad: Nástrčné tŕne pre kombinované frézy
- Rozhranie upínača nástrojov: HSK-A 63
- Upínací priemer: 16 mm
- Závit v upínacom priemere: M8
- Vyčnievajúca dĺžka: 60 mm
- Presnosť hádzania: ≤ 0,006 mm merané od kužeľa po D1
- Kvalita vyváženia: G2,5 pri 25 000 ot./min alebo Umax < 1 gmm
技術的詳細
| Technology | Combination shell and end mill adapters |
|---|---|
| Series | Combination shell and end mill adapters |
| Toolholder interface | HSK-A 63 |
| Toolholder standard | DIN ISO 12164-1 |
| Clamping diameter D1 | 16 mm |
| Thread tightening bolt G | M8 |
| D2 [mm] | 32.0 |
| Projecting length L1 [mm]/[inch] | 60 mm / 2.4" |
| L4 [mm] | 34.0 |
| L11 [mm] | 27.0 |
| L12 [mm] | 17.0 |
| Weight [kg] | 0.93 |
| Coolant-proof | yes |
| Standard length | yes |
Version
For mounting cutters with longitudinal or crosswise slot
Run-out accuracy
≤ 0.006 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Data carriers
Bore holes for data carriers according to DIN 69873
Toolholder changes
For automatic toolholder changes
Scope of delivery
Includes tightening bolt, drive ring, and feather key
Individual
Additional sizes and customized designs are available upon request