The desired stroke of the linear module can be entered at this point.

If the linear module has been designed using the linear module sizing assistant, the stroke is automatically adopted and may not be changed, as this affects the technical characteristics of the linear module.

Depending on the axle application, the position of the drive shaft on the profile must be defined.

Particularly with axis combinations and mechanical synchronization, several drive shafts are required.



The output of the drive shaft can also be seen in the CAD model.

The linear module can be secured either by using T-nuts or mounting rails.

The sliding blocks can be attached to different sides of the linear module.

No motor is included in the scope of delivery as standard.

If you need a motor, please contact us.