arrow calendar cartcheck checkmark close configure contact danger download external_link facebook globeinfo instagram jobfinder linkedin logo_claim logout mail menuminus navigation pin play plus rss searchshaft success twitteruserwarning wechat x-twitterxing youku youtube zoom
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
CELSIO SCAPTO C8 Ø8x80 Illustration similar

CELSIO SCAPTO C8 Ø8x80

Heat shrinking toolholder

ID 26002853

Delivery time on request
CELSIO SCAPTO C8 Ø8x80, Toolholders
  • Heat shrinking toolholder
  • Series: CELSIO
  • Toolholder interface: SCHUNK CAPTO C8
  • Clamping diameter: 8 mm
  • Projecting length: 80 mm
  • Run-out accuracy: ≤ 0.003 mm measured in the clamping bore (according to DIN 69882-8)
  • Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
  • Min. torque: 50 Nm
Technology Heat shrinking toolholder
Series CELSIO
Toolholder interface SCHUNK CAPTO C8
Toolholder standard ISO 26623-1
Clamping diameter D1 8 mm
D2 [mm] 27.0
D6 [mm] 21.0
Projecting length L1 [mm]/[inch] 80 mm / 3.1"
L2 [mm] 36.0
L3 [mm] 10.0
L4 [mm] 50.0
G M6
Min. torque [Nm] 50.0
Weight [kg] 1.0
Coolant-proof yes
Standard length yes
These product variants are suitable for both milling as well as turning centers

Concentricità
≤ 0,003 mm misurata nel foro di serraggio (secondo la DIN 69882-8)

Grado di bilanciatura
G2,5 a 25.000 giri/min o Umax< 1 gmm

Gambo utensile di qualità
h6

Sedi chip
Fori sede chip conformi alla norma ISO 69873

Cambio del portautensile
Per il cambio automatico del portautensile

Vite di regolazione della lunghezza
Con vite di regolazione della lunghezza assiale

Vite di bilanciatura
Con filettatura per viti di bilanciatura

Ogni esigenza
Ulteriori misure e versioni personalizzate disponibili su richiesta