TCU-P-080-3-MV
ID 324792
- ワーク重量: 6 kg
- 力 Fz 最大: 70 N
- 力 Fd 最大: 1500 N
Technical details
| 锁紧 | ロックあり |
|---|---|
| 弹性体的硬度 [Shore] | 68.0 |
| 挠曲 X [°] | ± 1 |
| 挠曲 Y [°] | ± 1.5 |
| 挠曲 Z [°] | ± 2 |
| 重复精度 [mm] | 0.1 |
| 重量 [kg] | 0.15 |
| 最小工作压力 [bar] | 4.0 |
| 最大工作压力 [bar] | 8.0 |
| 最低环境温度 [°C] | -10.0 |
| 最高环境温度 [°C] | 90.0 |
| 锁定力矩 Mx [Nm] | 4.0 |
| 锁定力矩 My [Nm] | 3.0 |
| 锁定力矩 Mz [Nm] | 6.0 |
| 锁定力 Fz [N] | 70.0 |
| 最大力 Fd [N] | 1500.0 |
| 直接连接至* | PGN-plus 80 |
| 长度 X [mm] | 42.0 |
| 宽度 Y [mm] | 63.0 |
| 力矩 Mx max. [Nm] | 30.0 |
| 力矩 My max. [Nm] | 12.0 |
| 力矩 Mz max. [Nm] | 40.0 |
尺寸和最大载荷
Deflection
负荷图
最大偏离
尺寸和最大载荷
解锁时力和扭矩Wie最大值，可同时作用。锁定时，仅允许重量和加速度产生的荷载。
Deflection
Deflection (fa) dependent upon the length (L) to the center of mass
负荷图
- X-axis:
- 最大距离
- Y-axis:
- 最大搬运重量
最大偏离
取决于至质心长度（L）的挠曲（fa）
General notes about the series
Harsh environmental conditions
Please note that use under harsh environmental conditions (e.g. in the coolant area, cast and grinding dust) can considerably reduce the service life of the units, and we will not take over any warranty. However, in many cases we can find a solution. Please contact us for assistance.
Handling weight
is the weight of the total load attached to the flange. When designing, the permissible forces and moments have to be paid attention to. Please note that exceeding the recommended handling weight will shorten the lifespan.
Monitoring
by magnetic switch
Actuation
pneumatic, with filtered compressed air as per ISO 8573-1:2010 [7:4:4].
Material
Elastomer material
Housing
Aluminum alloy
Scope of delivery
Robot-side mounting screws
Warranty
24 months