The desired stroke of the linear module can be entered at this point.

If the linear module has been designed using the linear module sizing assistant, the stroke is automatically adopted and may not be changed, as this affects the technical characteristics of the linear module.

The unit can be secured either by using T-nuts or mounting strips.

The linear module can be secured either by using T-nuts or mounting rails.

The sliding blocks can be attached to different sides of the linear module.

The absolute path measuring systems are optionally available with the interfaces: HIPERFACE® or DRIVE-CLiQ.

The encoder systems are certified according to SIL2/PLd.
This means that even demanding applications with high requirements in the area of machine safety can be implemented.

The outlet of the motor connector can be selected depending on the desired application.





The selected side is also adopted in the CAD model.

The linear module is optionally available with one or more safety holding brakes.
This holding brake is pneumatically actuated. Its function is activated in a non-ventilated state.
The holding brake is used to maintain the position of the linear axis in a currentless condition.
The holding brake is also suitable for applications in the field of machine safety.
In the case of a brake, this is installed on the side of the connecting cables.

SLD1: 400N per brake
SLD2: 600N per brake

The lubrication adapter enables connection to a lubrication system provided by the customer.
The lubrication adapter is always fitted opposite the electrical connections on the slide.