KOM JIS-BT 40 Ø22x55
Kombi-Fräser-Aufsteckdorne
Ident.-Nr. 263631
KOM JIS-BT 40 Ø22x55, Werkzeughalter
- Kombi-Fräser-Aufsteckdorne
- Baureihe: Kombi-Fräser-Aufsteckdorne
- Werkzeughalterschnittstelle: JIS-BT 40
- Spanndurchmesser: 22 mm
- Gewinde im Spanndurchmesser: M10
- Auskraglänge: 55 mm
- Rundlaufgenauigkeit: ≤ 0,006 mm gemessen vom Kegel zu D1
- Wuchtgüte: G2,5 bei 25.000 1/min oder Umax < 1 gmm
Technische Details
| Technology | Combination shell and end mill adapters |
|---|---|
| Series | Combination shell and end mill adapters |
| Toolholder interface | JIS-BT 40 |
| Toolholder standard | DIN ISO 7388-2 JD/JF |
| Clamping diameter D1 | 22 mm |
| Thread tightening bolt G | M10 |
| D2 [mm] | 40.0 |
| Projecting length L1 [mm]/[inch] | 55 mm / 2.2" |
| L4 [mm] | 28.0 |
| L11 [mm] | 31.0 |
| L12 [mm] | 19.0 |
| Weight [kg] | 1.34 |
| Coolant-proof | yes |
| Standard length | yes |
Version
For mounting cutters with longitudinal or crosswise slot
Run-out accuracy
≤ 0.006 mm measured from taper to D1
Balancing grade
G2.5 at 25,000 RPM or Umax < 1 gmm
Data carriers
Bore for data carrier as an option
Toolholder changes
For automatic toolholder changes
Coolant supply
Coolant supply according to ISO 7388 JD/JF
Bores for form JF are sealed for transport
Scope of delivery
Includes tightening bolt, drive ring, and feather key
Individual
Additional sizes and customized designs are available upon request