TRIBOS-RM HJND 50 Ø7x45
Porte-outils de serrage polygonal
Ident.-Nr. 1355381
Ce produit sera arrêté et ne sera disponible que pour une période limitée.
En savoir plus et nous contacter ici.
Jetzt anfragen
Dieses Produkt kann online nur angefragt werden.
TRIBOS-RM HJND 50 Ø7x45, Porte-outils
- Porte-outils de serrage polygonal
- Gammes: TRIBOS-RM
- Interface de porte-outils: HJND 50
- Diamètre de serrage: 7 mm
- Longueur de projection: 45 mm
- Concentricité: ≤ 0,01 mm de 4 x D
- Qualité d'équilibrage: Balourd résiduel 2 gmm/kg
- Couple de rotation min.: 6 Nm
Détails techniques
| Technology | Polygonal toolholders |
|---|---|
| Series | TRIBOS-RM |
| Toolholder interface | HJND 50 |
| Clamping diameter D1 | 7 mm |
| D2 [mm] | 14.0 |
| D3 [mm] | 17.5 |
| D4 [mm] | 19.0 |
| D5 [mm] | 23.0 |
| L [mm] | 64.5 |
| Projecting length L1 [mm]/[inch] | 45 mm / 1.8" |
| L2 [mm] | 40.0 |
| L4 [mm] | 30.0 |
| L5 [mm] | 35.0 |
| L6 [mm] | 37.0 |
| G | M8 |
| Min. torque [Nm] | 6.0 |
| Wrench size A/F | 16.0 |
| Max. tightening torque [Nm] | 8.0 |
Version
The following reduction insert is suitable alternative for lateral joining: TRIBOS-RM SRE SO 14 (1351506)
Run-out accuracy
≤ 0.01 mm of 4 x D
Balancing grade
Residual imbalance 2 gmm/kg
Tool shank quality
h6
Length-setting screw
Without adjustment screw for axial length adjustment
The minimum clamping depth is 25 mm
The maximum clamping depth is L2 = 40 mm
Individual
Additional sizes and customized designs are available upon request