Module als Werkstückschnittstelle
Spannmodule
Spannmodule bzw. Ausgleichsmodule als Schnittstelle zum Werkstück. Die Spannmodule können pneumatisch oder manuell betätigt werden. Die Ausgleichsmodule dienen zum Ausgleich von feinen Höhenunterschieden.
Beschreibung
Advantages – Your benefits
- Compensation of height differences up to 11 mm
Customized adjustment to the respective clamping task - Scope-free pin centering between components
High repeat accuracy of < 0.005 mm - Intelligent clamping connection between the stacking modules
For simple and quick operation - High pull-down forces
Up to 15 kN for high cutting parameters and greater production efficiency - Turbo integrated by default
Pull-down force increased up to 300% for optimal utilization of the machine's performance, hence high efficiency. - Form-fit, self-retained locking
Full pull-down force is maintained even in the event of a pressure drop - Corrosion-free stainless steel design
Long life time and maximum process reliability
Options and special information
- WDP-5X-DSM 99-70
Pneumatically actuated direct clamping module with high pull-down forces. The workpiece is clamped via spring force in a self-locking and form-fit fashion. - WDP-5X-DSM 99-70-M
Manually actuated direct clamping module with a high pull-down force. The workpiece direct clamping takes place via a rotary movement of an actuating screw, is form-fit and self-locking. - WDP-5X-ASM 99-70-Ø36
Pneumatically actuated compensation module with a high holding force. The compensation module can freely compensate for height differences of up to 11 mm. The workpiece is clamped via spring force in a self-locking and form-fit fashion.