ERT
Univerzální otočná jednotka
Univerzálně použitelná plochá rotační jednotka s absolutním enkodérem a elektrickou brzdou, stejně jako volitelné zvýšení třídy ochrany (IP54)
Popis
Výhody – Přínos pro Vás
- Integrovaný momentový motor
pro vysoký krouticí moment a flexibilní použití díky ovladatelnosti polohy, rychlosti a krouticího momentu - Velmi ploché provedení
pro minimální rušivé kontury a použití v omezeném prostoru - Se systémem absolutního měření polohy
Snadnější programování a větší úspora času při uvádění do provozu a během provozu - Volitelná certifikovaná bezpečnostní zařízení podle SIL2/PLd
s rozhraním DRIVE-CliQ pro aplikace s vysokými požadavky v oblasti bezpečnosti stroje - Volitelná elektrická brzda
pro udržení klidové polohy - Velký středový otvor
pro vedení kabelů a hadic médií - Různé možnosti ovládání
pro snadnou integraci do stávajících konceptů řízení pomocí různých externích ovladačů třetích stran (např. Bosch Rexroth IndraDrive nebo Siemens SINAMICS) - NOVINKA:
Technologie jediného kabelu HIPERFACE DSL® šetří náklady, vyžaduje méně prostoru a snadno se implementuje.
Options and special information
- Using the electric holding brake
The installed brake is only designed to be used as a holding brake. Consequently, it may only be actuated when stationary. Use as an operating brake is not permitted and significantly increases wear. - Design with IP54 option
With the IP54 option, increased friction is caused by the seals (top and bottom). These have a minor effect on the cycle time in a normal positioning process (< 360°). In this case, the ERT can be designed with the IP54 option in the sizing assistant on the homepage. When used as a rotary drive (continuous rotary movement), the friction of the seals (top and bottom) reduces the available input torque. In this case, additional factors must be taken into account during the design. Please ask for details. - UL certification
The electrical ERT rotary module is partially available with UL certification (certified according to US and Canadian regulations) on request. Please contact us. - Certified encoder system
The encoder system with the DRIVE-CLiQ interface is certified according to SIL2/PLd. This means that even demanding applications with high requirements in the area of machine safety can be implemented. Please contact us for further information. - HIPERFACE DSL® encoder interface
The HIPERFACE DSL® encoder interface is a purely digital motor feedback protocol. Due to the single cable technology, it is possible to save costs, it requires less space and it is easy to implement. This interface is currently only supported by the Beckhoff AX8000 drive controller. Please contact us if you would like to use our product with other controllers that support the Hiperface DSL® interface.